It adopts flat-plate forming mould, normal pressure to form, blister with homogenous hardness, and is equipped with high automation system, the machine is very efficient. It is widely used in pack Alu-PVC package for capsule, tablet in pharmaceutical industry. Depending on the model, capacity may vary between 14400 and 21600 blisters per hour.
This machine is suitable for automatic high-speed alu/pvc packing of capsules, tablets and chewing gums, candies. It adopts flat pressure forming to form strong and average blisters and roller type mesh sealing to ensure reliable sealing. The machine is equipped with batching system, embossing device and horizontal boundless punching to achieve high production capacity and greatly save packing material. Capacity is 18000 blisters per hour.
This is a device to make products into a blister pack. The blister pack is several types of pre-formed plastic packaging used for small consumer goods, foods, and pharmaceuticals such as tablet blister pack, pill blister pack, capsule blister packing, and soft gel capsule blister pack. The primary component of a blister pack is a cavity or pocket made from a formable web, usually a thermoformed plastic.
The Alu-Pvc/Alu-Alu blister-packing machine of DPPS170A takes full use of compound forming Pvc-Alu (Alu-Alu) foil as packing material to punch beautiful blisters through special punching module. After feeding, detecting, sealing, batch number printing, slitting and punching, the product made by the machine presents a fine appearance and reliable condition. Capacity is 60 cuts per min. for Alu/PVC blisters and 40 cuts for Alu/Alu blisters.
Designed for packing solid medicine, tablets, capsules, soft capsules, etc. Automatically completes PVC feeding, PVC heating PVC forming, Medicine feeding, sealing, batch number, cutting, blister output. To operate the machine needs compressed air supply with a pressure of 0.6 – 0.9 MPa. Maximal cutting speed is 200 times per minute.
Designed for packing solid medicine, tablets, capsules, soft capsules, etc. Automatically completes PVC feeding, PVC heating PVC forming, Medicine feeding, sealing, batch number, cutting, blister output. To operate the machine needs compressed air supply with a pressure of 0.6 – 0.8 MPa. Maximal cutting speed is 240 times per minute.
High Speed Alu-Pvc blister packing machine is the new high-tech production combined with domestic and abroad experiences. DPH320 adopts complete servo motor driving system, it can complete accurate control, low noise, high speed of production, easy changing of model, accordingly achieve high-efficiency automatic medicine packing, minimum personnel and material cost. To operate the machine needs compressed air supply with a pressure of 0.6 – 0.9 MPa. Maximal cutting speed is 250 times per minute.
DPP400 blister packing machine is specially designed for packing ampoules, vials and syringes. Its max. cutting speed is 30 cuts/min, max. forming depth is 35 mm, max. forming area is 390 x 150 mm.
Designed for packing products into blisters with a punch frequency 10 – 35 punches per minute. The machine uses the newest type of power transmission mechanism, driven by the main drive shaft row chain, eliminating errors and other gear noise. To operate the machine needs a compressed air supply with a pressure of 0.6 – 0.8 MPa.