CFK-2500 full-automatic capsule filling machine adopts intermittent rotary operation, orifice disc type filling, precise and beautiful design, stable and reliable operation. It can automatically complete a variety of procedures such as sowing capsules, separating capsules, filling, rejecting capsules, locking capsules and exporting finished products. Capacity: 150 000 pcs/hour
CGN208-D1 type capsule filling machine is new efficient equipment based on DTJ-C model (old type). Instead of manual filling, it reduces labor intensity, which is the ideal equipment for capsule filling for small and medium-sized pharmaceutical companies, pharmaceutical research and development institutions. Capacity: 30 000 pcs/hour
CGN208-D capsule filling machine is a latest model with great efficiency. It adopts straight pins to position the whole sowing assembly, reducing the time of changing and adjusting mould to 5~8 minutes. Comparing to the old model, this machine is simpler and more intuitive on capsule feeding, turning around, vacuum separating and human operation, with higher rate of good finished capsules. Capacity: 25 000 pcs/hour
CFK-3500 full-automatic capsule filling machine adopts intermittent rotary operation, orifice disc type filling, precise and beautiful design, stable and reliable operation. It can automatically complete a variety of procedures such as sowing capsules, separating capsules, filling, rejecting capsules, locking capsules and exporting finished products. Capacity: 210 000 pcs/hour
NJP-400A Fully Automatic Capsule Filling Machine is filled by powder, grain, and tablet. It is suitable for automatically completing capsule feeding, separating, filling, (waste capsule rejecting), closing, finished product ejecting for powder or tiny pill medicine in capsule. It is designed sophisticatedly by our factory according to the practice on domestic; it is fully accord with the GMP standard. Max output: 400 capsules/min
NJP-800 Fully Automatic Capsule Filling Machine is filled by powder, grain, tablet. It adopts multi-bore dosing, intermittent motion and timing frequency conversion. It is suitable for automatically completing capsule feeding, separating, filling, (waste capsule rejecting), closing, finished product ejecting for powder or tiny pill medicine in capsule. Max output: 800 capsules/min
The machine is suitable for Powder, Granular and Pellet filling etc, special for Capsule size from #00 to #5. It is an ideal equipment for filling capsule drugs and meets GMP standard. Capacity: 1500 pcs/min
The machine is our newly upgraded generation special for Pharmaceutical products industry. Can fill material in powder, pellet, or granule forms. Special Designed Double Head capsule sowing device adopts automatic servo motor system which make capsule auto separation after sowing. Capacity: 36 000 capsules/hour
Designed for filling capsules with powders, pellets and microtablets. Applicable capsule sizes are 00 – 4. In compliance with cGMP rules. PLC controlled; parameters are set via HMI on a touchscreen. All product contact parts are of SS316 or hard anodized aluminum. Perfect machine for R&D Lab/Process development lab/ small size batch production for trial research. Capacity is up to 3,000 capsules per hour. To operate the machine needs compressed air supply with a pressure of 4 – 5 Bar.
This machine is featured with a high accuracy filling, it has a better yield and less wastage. It can fill products in capsules of any size between 00 and 4. The machine can fill any combinations of powders, pellets and microtablets. Confirms with cGMP guidelines and 21 CFR Part 11 compliance. Easy and quick capsule size and product change over. Easy to operate. Capacity is up to 40,000 capsules per hour.