This line consists of a vertical ultrasonic washing machine, hot air circulatory tunnel sterilizing drier and antibiotics vial liquid filling and stoppering. The line is widely used for freeze-drying product and blood product manufacturing. The equipment fully complies with GMP.
Designed to automatically feeding, filling, stoppering, cap-arranging, cap-installing and sealing vials with product. It can work with 50 – 250 ml plastic and glass bottles and aluminum / plastic caps. Capacity is 30 – 80 bpm.
Designed for production of products in 1 – 20 ml ampoules and can complete procedures such as water spraying, ultrasonic cleaning, three-time water washing (two-time cycling water, one-time fresh water), drying and sterilizing, cooling, bottling, air (nitrogen) charging. Controlled by PLC, parameters are sent via touchscreen.
The machine is mainly used for bottling and capping ampoules in aseptic conditions at pharmaceutical factories. It is an 8, 10 or 12-step transmission system and has a platform structure. The machine performs bottle-feeding, nitrogen charging, filling, preheating and capping
The machine is a new generation of ampoule drawing, filling and sealing used at injectable forms productions. Main parts and components are made of stainless steel and with great accuracy guaranteeing absolute exchangeability of parts. Capacity depends on the model and can vary from 6000 to 13500 pcs/h.
Designed to wash, dry, sterilize and fill 2 – 10 ml vials. Sterilization temperature is 300oC – 350oC. Main components of the machine are made of SS 304, the parts contacting the product are made of SS 316L. Production capacity is 300 bottles per minute.
Designed for cosmetics and pharmaceutical production. Auto-feed, Fill, cap/double cap and labeling for vials and other pharmaceutical/ cosmetics products in one block. Filling tolerance of only 0.25% of volume, output is 55 units per minute.
Designed to fill tin and aluminum cans, PET, PVC and glass bottles with pharmaceuticals, cosmetics, homecare, shampoo, agricultural products, natural and mineral oils, etc. Filling unit is made of 316 stainless steel. Filling volume is 500 – 5000 ml, output is 600 – 1,200 pieces per hour.
The machine consists of two units, filling and capping and is designed to fill tin and aluminum cans, PET, PVC and glass bottles with pharmaceuticals, cosmetics, homecare, shampoo, agricultural products, natural and mineral oils, etc. Filling unit is made of 316 stainless steel. Filling volume is 100 – 5000 ml, output is 2000 – 3000 pieces per hour.
The unit is built on a chassis, which has wheels to move it easier. There are various models with different volume ranges: 25 – 250 ml, 50 – 500 ml, 100 – 1000 ml, 250 – 2500 ml and 500 – 5000 ml. The unit can be used in both manual and automatic modes. For manual mode, the operator presses on foot pedal each time to fill.