Fully automatic machine for filling and closing metal, plastic and laminated tubes at speeds up to 110 pcs / min. The machine is used in the pharmaceutical, cosmetic and food industries, as well as for filling glue, lubricants, sealants, etc.
This machine is suitable for filling, sealing ointment, cream, gel, etc. in a plastic tube, a laminated tube or an aluminum tube, and then sealed. Product capacity: 120 pc/min
This machine is a high-tech equipment that was successfully developed and designed through the introduction of advanced foreign technologies and the integration of GMP requirements. It is ideal equipment for filling and sealing aluminum, plastic tubes in cosmetics, pharmaceuticals, food, adhesives, etc. The equipment complies with the GMP standard. Product performance 4200 pcs / h
The RT60 with speeds to 70 tubes per minute has a compact 8 station dial and will fill a variety of sizes and styles of tubes with the option to fill plastic and metal tubes on one system.
This machine is used for filling all kinds of soft plastic tubes or plastic-aluminum laminated tubes, sealing and cutting the end of the tubes, and pressing date or series numbers on the end. It is widely used in daily chemical, pharmaceutical, and food industries. PLC controlled.
This product is our company’s introduction of foreign advanced technology, combined with the requirements of GMP to optimize the design of the successful development of high-tech equipment. With reasonable structure, complete functions, convenient operation, accurate, stable operation, low noise and using PLC programmable controller to make the whole machine running procedure.
The machine is suitable for the filing of paste and fluid, widely applied in production of cream, oil, syrup, lotion, shampoo, béchamel, fruit juice industries, etc. It is full-featured, well-structured, stable performance, accurate filling. It adopts stainless steel and confirms to GMP standard.
Automatic Tube Filling Machine For Plastic Aluminum Laminated is widely used for filling and sealing Ointment, mousse, toothpaste, lotion, jam Viscous material, seal or tail folding batch number embossing (including manufacturing date) automatically.
The machines are used for tube filling and can reach high speed of operation with 12 Stations compact rotor. GMP model, which can be used to fill maximum 300 ml. Accuracy is approximately equal to +/-1%. Height of the tube ranges from minimum 60 mm to maximum 250 mm, while diameter may range from minimum 15 mm to maximum 60 mm. Capable of keeping the product consistently in homogeneous state.
These machines are designed to pack products into both laminated and plastic tubes. They are easy to operate, have compact in design, equipped with jacketed hopper with stirrer, tube counting device and tube orientation. Capacity is 25 – 40 tubes per minute, filling range is 5 – 200 ml.