PLC controlled, parameters are set via HMI on a touchscreen. After the filling process the bottle is fed into the capping part for capping. This machine is suitable for pressing special-shaped LIDS in food, beverage, chemical industry, medicine, cosmetics, pesticide and other industries. Complies with GMP requirements.
This machine is a single-head capping machine, adding a set of arrange the lid. After the filling process, the bottle is tightened by turning the cap after the lid is removed, grabbed and covered. In this way, the labor intensity can be relieved and the labor can be replaced. The equipment is simple in structure and complies with GMP requirements.
Link-4100A machine integrates automatic bottle feeding, automatic bottle unpacking, automatic capping, automatic vacuuming, automatic capping and automatic bottle discharging into one, with high production speed, high efficiency and stable and reliable operation. Speed: 2000 times/hour
The fully automatic capping machine of our factory adopts electrical combination to control the movement, with high stability. It can lock caps of different shapes and specifications. The speed of the cap locking can be adjusted and the tightness can be adjusted according to different caps. Production efficiency: 45 bottles/min
The press and capping machine PTSC-6L is used to press caps and screw caps after filling machine. It is suitable for most kinds of screw caps. Widely used for cosmetics / medical / chemical / food industry. And it can be linked with filling machine and labeling machine in line. Capping speed: 700 bottles/hour
Suitable for unscrew and rotate covers of various round bottle, square bottle, flat round bottle. The machine is widely used for full-automatic screwing cap in foods &beverage, spice, medicine, chemicals, industries and so on. Production Capacity: 30~35 bottles/min
This automatic machine is suitable for sealing of disposable aluminum wring type anti-theft caps. Capacity is up to 4500 BPH. Applicable bottle diameter must be within 45 - 90 mm, bottle height must be within 180 - 320 mm. Cap diameter must be within 22 - 32 mm. To operate the machine needs compressed air supply with a pressure of 0.6 - 0.8 MPa.
This economical electric cans sealing machine, suitable for sealing various round cans, such as metal cans, glass cans, plastic cans, aluminum cans etc. Speed: 10-20 pcs/min
This machine is designed for capping cans with plastic covers. PLC controlled, parameters are set via HMI on a touchscreen. Stainless steel structure. With different tooling, this machine can be used to feed and press all kinds soft plastic lids. To operate the machine needs compressed air supply with a pressure of 6 kg/m3. Capping speed is 30 – 40 cans/min.
This machine is used to evacuate, flush with gas and seam cans. PLC controlled, parameters are set via HMI on a touchscreen. Applicable scope is milk powder, health products (albumen powder, nutrition powder), solid drinks, condiments, snack food etc. Productive speed is 13 – 14 cans per minute.