The VCM Series fully automatic closing machines can be used for the implementation of a variety of closing systems.
The CVC1205 Capper is a very flexible machine designed to apply and tighten screw-on caps onto containers at rates of up to 120 bottles per minute. The CVC1205 is PLC controlled and comes standard with a 6" touch screen terminal and 4 sets of adjustable spindles. Options include tower lamp, hopper level control, cap inspection (level cap, foil seal, and no cap), reject, and reject verification.
The CVC1208 In Line Cap Retorquer is designed to retighten screw-on caps after induction sealing at speeds of up to 120 bottles per minute. The 1208 is PLC controlled and comes standard with a 6" Touch Screen terminal. Options include tower lamp, servo torque metering, reject, and reject verification.
PLC controlled, parameters are set via HMI on a touchscreen. After the filling process the bottle is fed into the capping part for capping. This machine is suitable for pressing special-shaped LIDS in food, beverage, chemical industry, medicine, cosmetics, pesticide and other industries. Complies with GMP requirements.
This machine is a single-head capping machine, adding a set of arrange the lid. After the filling process, the bottle is tightened by turning the cap after the lid is removed, grabbed and covered. In this way, the labor intensity can be relieved and the labor can be replaced. The equipment is simple in structure and complies with GMP requirements.
Link-4100A machine integrates automatic bottle feeding, automatic bottle unpacking, automatic capping, automatic vacuuming, automatic capping and automatic bottle discharging into one, with high production speed, high efficiency and stable and reliable operation. Speed: 2000 times/hour
The fully automatic capping machine of our factory adopts electrical combination to control the movement, with high stability. It can lock caps of different shapes and specifications. The speed of the cap locking can be adjusted and the tightness can be adjusted according to different caps. Production efficiency: 45 bottles/min
The press and capping machine PTSC-6L is used to press caps and screw caps after filling machine. It is suitable for most kinds of screw caps. Widely used for cosmetics / medical / chemical / food industry. And it can be linked with filling machine and labeling machine in line. Capping speed: 700 bottles/hour
Suitable for unscrew and rotate covers of various round bottle, square bottle, flat round bottle. The machine is widely used for full-automatic screwing cap in foods &beverage, spice, medicine, chemicals, industries and so on. Production Capacity: 30~35 bottles/min
This automatic machine is suitable for sealing of disposable aluminum wring type anti-theft caps. Capacity is up to 4500 BPH. Applicable bottle diameter must be within 45 - 90 mm, bottle height must be within 180 - 320 mm. Cap diameter must be within 22 - 32 mm. To operate the machine needs compressed air supply with a pressure of 0.6 - 0.8 MPa.
