GPK-40 is a carton forming and bottom sealing packing machine, which is controlled by PLC and operated from HMI system. Machine can do 12 carton forming and taping in every minute. Carton board can be loaded without stopping the machine. Settings for different carton size are performed manually.
GPK-40H30 is a horizontal type carton forming and bottom-sealing machine. PLC controlled. The carton erecting speed can be adjusted on the touch screen. Easy carton storage system, no need to stop the machine while adding the carton. Adopts the cam mechanical driving system. The machine runs accurately, stably, and is durable.
GPK-40H50 is a horizontal type carton forming and bottom-sealing machine. PLC controlled. The carton erecting speed can be adjusted on the touch screen. Easy carton storage system, no need to stop the machine while adding the carton. Adopts the cam mechanical driving system. The machine runs accurately, stably, and is durable.
Designed to erect cartons and close them after interconnected filling machine. Cartons are closed by hot melt adhesive. The machine is equipped with automatic leaflet insertion device. Easy and fast changeover, optimal speed is 120 cartons per minute.
Designed to erect carton boxes out of folded premade dummies. Fully cam driven continuous system assures positive and stable motion with maximum stability. Can work with all types of adhesive tapes. Output depends on the model and can reach up to 40 cartons per minute.
The C-Series provide the structural integrity to deliver the performance their designer intended. From the moment a blank enters our case erectors' magazine until it exits the case erector as a properly formed and bottom sealed case, it is under complete control. A unique pickup frame pulls the case from the magazine and forces it to open so it is square. The flaps are folded before the case moves, making it rigid and locking in its “squareness”. A pusher bar, parallel to the rear wall, delivers it to spring-loaded side belts, which move in or out to compensate for variations in width, and carry it over the sealing device.
XT-40 is suitable for molding and sealing boxes of the same size. If you need to change the size of the box, the operator must manually adjust the machine. The machine is designed so that the molding, folding and sealing process is carried out simultaneously. Cardboard blanks can be added at any time without stopping the machine.
XT-40H18 is suitable for molding and sealing boxes of the same size. If you need to change the size of the box, the operator must manually adjust the machine. The machine is designed so that the molding, folding and sealing process is carried out simultaneously. Cardboard blanks can be added at any time without stopping the machine.
XT-40H25 is suitable for molding and sealing boxes of the same size. If you need to change the size of the box, the operator must manually adjust the machine. The machine is designed so that the molding, folding and sealing process is carried out simultaneously. Cardboard blanks can be added at any time without stopping the machine.
The carton erector machine can finish the work of carton opening, shaping, folding and sticking the adhesive tape in the bottom of the carton. Applicable carton size is 250 – 450 (L) x 150 – 400 (W) x 100 – 400 (H). Productivity is 8 – 12 cartons per minute. To operate the machine needs compressed air with pressure 5 – 6 kg/cm3.