The machine is used for production of Shampoo, Washing liquid, Lotion, Paste, Water, Oil, Juice etc. PLC controlled, parameters are set via HMI on a touchscreen. To operate the machine needs compressed air supply with a pressure of 0.6 - 0.8 MPa.
It adopts automatic cap arrangement, automatic adjustment of cap direction, automatic cap capping, and automatic cap screwing. This machine runs smoothly, has low noise, large application range, and high capping rate. Capacity: 8000 containers/hour
Equipped with 16 filling heads, high efficiency with high production capacity around 6000 BPH (for 750ml foamy products). Filling range, diameter of bottle and its mouth can be customized. PLC controlled, parameters are set via HMI on a touchscreen. To operate the machine needs compressed air supply with a pressure of 0.55 - 0.65 MPa.
The machine is designed for filling bottles with viscous liquids. Applicable bottle diameter is not more than 160 mm. Applicable bottle height is not more than 350 mm. To operate the machine needs compressed air supply with a pressure of 0.6 - 0.8 MPa. Output is up to 1800 BPH.
This series filling machine is a high-tech filling equipment controlled by microcomputer PLC program which equipped with optical, mechanical, electrical sensors, pneumatic action. Material filling adopting sanitary stainless steel rotor pump can achieve precise measuring under servo motor control.
Designed for aggressive liquids filling. Contact liquid parts use anticorrosive non-metallic material and with diving function, they can effectively eliminate the bubbles. PLC controlled, parameters are set via HMI on a touchscreen. Applicable bottle diameter must be within 40 – 100 mm, bottle height must be within 60 – 300 mm. To operate the machine needs compressed air supply with a pressure of 0.6 - 0.8 MPa. Capacity is 7200 BPH.
Easy to install, simple to operate and requires minimum maintenance for maximum performance and long machine lifetime. PLC controlled, parameters are set via HMI on a touchscreen. Sturdy conveyor system driven by high quality motor. Adjustable conveyor guide rails to accommodate with different products.
Adjustable speed while filling, it can fill slowly at the beginning and then accelerate to faster speed, finally slow down once again to finish up. This can prevent foamy liquids from bubbling and avoid spillage. Contact parts are made of stainless steel 304 or 316L.
This Automatic piston filling machine is the upgrade volumetric filling that can be widely used for the high viscosity filling of liquid, EC, SL and SC. The machine is with linear structure and servo motor driven, volumetric filling method that can make sure the high precision of filling. PLC controlled, parameters are set via HMI on a touchscreen.
Automatic linear piston filling machines are extremely flexible piston fillers capable of filling accurately and rapidly a wide variety of products from low viscosity liquids to high viscosity paste or cream with or without chunks or particulates. Widely used in chemical industry (e.g., grease filling machine, lubricant filling machine, etc); agrochemical industry.
