Automatic Two nozzles Piston Filler NFP-425 is designed for general flowing liquids and liquids with higher consistency. Two nozzles suits for small production with various kinds of bottles. Tool-less changeover is easy and all adjustment can be done on colorful touchscreen.
The liquid packaging equipment compliances with cGMP liquid production guidelines and the common application is for below 60mL low viscosity products. The packaging equipment synchronizes filling, plugging and capping procedures to reduce occupied space of the clean room. Furthermore, according to customer’s special requirement, the position filling is capable to be modified to the peristaltic pump filling.
The liquid packaging equipment compliances with cGMP liquid production guidelines and the common application is for below 60mL low viscosity products. The packaging equipment synchronizes filling, plugging and capping procedures to reduce occupied space of the clean room. Furthermore, the filling volume adjustment is computerized with servomotor controlled to increase operation convenience and reduce the adjustment time.
AF-80S liquid filling equipment common application is for above 60mL high viscosity liquid products such as shampoo, honey etc. The filling procedure applies piston-filling method with pneumatic check valves and nozzles to minimize liquid leaking after filling procedure is completed. The filling volume adjustment is computerized with servomotor controlled to increase operation convenience and reduce the adjustment time. In addition, the optimized filling deviation is capable to reach ±1%.
The ointment filling equipment is semi-automatic volumetric filler for high cohesion material such as gel, cream and etc. By applying the piston filling method is capable to stabilize volume accuracy and minimize deviation. With the storage tank heating system can keep material flow stable to reduce risks influencing the machine performance.
CSL-F liquid filling equipment is semi-automatic liquid level filler for low viscosity liquid. The filling procedure applies the vacuum filling method. The finished product liquid level is adjustable according to customer’s requirement. By equipping with the liquid recycle tank is capable to save raw material wasting and reusable.
Liquid vial production processors design compliances with cGMP of liquid injection product guidelines. The processors are applicable for low viscosity and volume below 60mL. In order to minimize particle of pneumatic accessories polluting environment, inner plug placing procedure applies vacuum carrying and motion controlling. The capping procedure is isolated from the filling with plugging zone. All parts in contact with product raw material are made of SS 316L.
This machine has the function of automatic bottle charging, positioning, filling, cap charging and screw capping and can be used in paramedical, food, cosmetic, chemical and other industries. It uses the sensor for automatic checking to achieve no-bottle-no-filling and stop the filling process automatically or give an alarm. Can work in line or as a stand-alone machine.
EKZD-1 uses automatic bottle & cap filling and screw-capping system, which can match with the packing machine, labeling machine, etc. Fast and accurate filling volume. Conveyer belt and panel made of stainless steel are durable and clean. Volume of Bottle: 1.5-15ml
The machine is used in pharmaceutical industry for filling and capping infusions into containers with capacity of 100 – 500 ml. Complies with GMP requirements. Parts contacting the product are made of stainless steel 316L. Output: 100 – 200 bottles per minute.