The machine is used for cap screwing of round bottles, rectangular flat bottles or oblate bottles. Equipped with advanced HMI and PLC control. The machine can work with caps 19 – 55 mm in diameter, bottles with 23 – 100 mm in diameter and 45 – 320 mm in height.
The machine is used for capping round and square bottles for food, medicine, cosmetics and chemicals. Equipped with advanced HMI and PLC control. Major components are made of 304 stainless steel. The machine can work with a screwing speed 10 – 40 bottles per minute.
The machine is used for capping of bottles of which mouth height is consistent with or higher than the body height. Equipped with advanced HMI and PLC control. Major components are made of 304 stainless steel. The machine can work with a screwing speed 10 – 40 bottles per minute.
The POB-1S machine is ideal for packaging a wide range of products in plastic cups sealed with aluminum foil lids. Output: up to 12 cups a min
The machine has simple structure, convenient adjustment; production speed is fast, high pass rate, after cap pressing has good performance, it suitable for cap pressing of foodstuff, soy sauce, vinegar, vegetable oil in bottles. Applicable bottle diameter must be within 50 – 110 mm, bottle height — within 150 – 300 mm. To operate the machine needs compressed air supply with a pressure of 0.6 - 0.8 MPa.
This automatic inline capping machine has four speed-adjustable motors, which separately used in lid arranging, bottle clamping, lid capping and conveying. Applicable bottle diameter must be within 50 – 110 mm, bottle height — within 150 – 300 mm. To operate the machine needs compressed air supply with a pressure of 0.6 - 0.8 MPa.
This automatic inline capping machine has four speed-adjustable motors, which separately used in lid arranging, bottle clamping, lid capping and conveying. Applicable bottle diameter must be within 35 – 140 mm, bottle height — within 50 – 300 mm. To operate the machine needs compressed air supply with a pressure of 0.6 - 0.8 MPa.
This capping machine is dedicated to inline capping of the lid with nozzle and gunner cap, used in daily chemical and cosmetics industries.
FXG-1 Automatic Tracking Type Capping Machine is making up with the bottle unscramble & conveyor, cap gripper & capping structure, moving mold, conveyor structure and control system. This capping machine is with simple structure and easy adjustment. It is used for the automatic capping for 5-30 L drums.
Servo motor is used to drive the turntable, which has the characteristics of simple structure, stable operation and low noise. One-key startup, the turntable will automatically reset after booting to ensure the normal operation of production. Jammed tank shutdown alarm function: effectively avoids mechanical structure damage caused by jammed tank.
