Fully automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. To operate the machine needs compressed air supply with consumption of air 9 – 16 m3 per minute.
It can automatically arrange the preform into the pre-heater, bottle will drop out automatically from mould. PLC controlled; parameters are set via HMI on a touchscreen. The machine works properly and stable. Special mould locking system enables faster mould locking while saves the source a lot. Suitable for mineral water bottle, carbonated beverage, fruit juice bottle, oil bottle, cosmetic bottle.
The automatic bottle blowing machine is suitable for water bottle, oil bottle, medicine, juice bottle, seasoning bottle, carbonated beverage, cosmetic bottle and other packaging containers. Servo high-speed bottle blowing machine has a stable infrared heating system, the infrared lamp can realize stepless pressure regulation, the bottle embryo pitch is small, the heating efficiency is high, and the heating energy consumption is reduced by 30-40%.
Equipped with the servo motor, which is adopted to drive the molding mechanism, triggering off a bottom mold linkage as well. The whole mechanism works speedy, accurately, stably and flexibly. Meanwhile, it is energy efficient and environmentally safe. The capacity of each cavity can be up to 700~900bph.
Fully automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle, hot fill bottle, etc. The ideal cooling system makes the finished bottles without any flaws.
Servo high-speed bottle blowing machine is a stable two-step blow-down stretch automatic blowing machine. It can be used from 2 cavity to 9 cavity with a speed of 1300 ~ 1500 bottles/ cavity/ hour (600 ml plastic bottles), max. volume is 2L plastic bottle. The machine is suitable for blowing any kind of carbonated beverage bottle, sparkling beverage bottle, pure water bottle, mineral water bottle, fruit juice beverage bottle, cosmetic bottles, large diameter bottles, high temperature resistance bottles and other packaging bottles.
This servo high-speed bottle blowing machine has a stable infrared heating system, the infrared lamp can realize stepless pressure regulation, the bottle embryo pitch is small, the heating efficiency is high, and the heating energy consumption is reduced by 30-40%. PLC controlled; parameters are set via HMI on a touchscreen. Capacity is 1,000 – 2,000 BPH.
This is a high-speed rotary blow molding machine developed by Fillex using the international advanced bottle technology. It uses high pressure compressed gas to blow PET preforms into a type. The series of fully automatic rotary blow molding machines can be used to independently blow the bottle or to blow the bottle in front of the filling line. Capacity can reach 24000 bottles / hour.
Automatic stretch blow molding machine adopts infrared type heating mode, which superior thermal-radiation and thermal penetrability provides machine with powerful heating to meet strict preform heating requirement under speedy moving. Infrared heating lamps placed onto three heating zone with 10 sets of independent voltage adjusting module and advanced microcomputer controller, can offer ideal heating for preform in different size.
Automatic stretch blow molding machine adopts infrared type heating mode, which superior thermal-radiation and thermal penetrability provides machine with powerful heating to meet strict preform heating requirement under speedy moving. Infrared heating lamps placed onto three heating zone with 10 sets of independent voltage adjusting modules.