This high speed injection molding machine is specially working with the PET preform mould to make the preforms. Different mould specification choose different machine model. Variety high speed injection molding machine specification, suitable for different kind of PET preform moulds. Screw speed: 0-150 r.p.m
WBS-2 Semi-automatic bottle blowing machine is suitable for producing plastic containers and bottles from 10-2000ml. It is widely to produce Soda bottle, mineral water, carbonated drink bottle, pesticide bottle, oil bottle, wide-mouth bottle etc. Theoretical output: 1000 pcs/hr
WBS-1 Semi-automatic bottle blowing machine is special for the bottle from 4L-7L. Also suitable for producing plastic containers and bottles from 10-2000ml. It is widely to produce Soda bottle, mineral water, carbonated drink bottle, pesticide bottle, oil bottle, wide-mouth bottle etc. Theoretical output: 500 pcs/hr
WBS-4 (2 blowers and 1 heater) Semi-automatic plastic bottle blow molding machine is suitable for producing plastic containers and bottles from 10-2000ml. It is widely to produce Soda bottle, mineral water, carbonated drink bottle, pesticide bottle, oil bottle, wide-mouth bottle etc. Theoretical output: 1800 pcs/hr
This series is a completely new generation of linear blowing machines, distinguished by its high speed, low power and low compressed air consumption, featured by the excellent structure design, small space occupation, less noise and high stability. Meanwhile conforms to national beverage sanitary standards. Maximal bottle height is 300 mm; maximal bottle diameter is 80 mm.
WBS-1-10 plastic Bottle Making Machine (semi-automatic Bottle Blowing Machine) blows bottles from 5L-10L. 5L 2 cavities, 10L 1 cavity. It is suitable to produce different shapes of water bottle and oil bottles. With low investment and easy operation, it is popular with customers. Maximal bottle height is 400 mm; maximal bottle diameter is 200 mm.
WBMS-4 Semi-automatic 3 cavity and 4 cavity semi-automatic Bottle Blowing Machine blows PET bottle from 0.1-1.5L neck size from 18mm-30mm. PLC controlled, parameters are set via HMI on a touchscreen. Maximal bottle height is 360 mm; maximal bottle diameter is 105 mm.
WBMS-3 Semi-automatic 3-cavity and 4-cavity semi-automatic Bottle Blowing Machine blows PET bottle with maximal capacity 1.5L. PLC controlled, parameters are set via HMI on a touchscreen. Maximal bottle height is 360 mm; maximal bottle diameter is 105 mm.
WBB-4SS 4 cavity plastic Bottle Blowing Machine with 3 servo motors, stretching servo motor, clamping servo motor and moving preform servo motor, with the advanced design, strong quality and simple structure, this automatic bottle blowing machine output can reach to 6500BPH. It becomes one of the most popular product in our company for the medium size production sites. Maximal bottle height is 360 mm; maximal bottle diameter is 105 mm.
Model JH450A adopts plate heating system to make caps, servo motor rolls the plate. The mold is easier to change, and the machine power is small, the cost of the mold is small, the energy consumption is lower. This machine is mainly used for making lids and small trays. Impact frequency: 30 strokes / min