The model 1000SS Redundant-head Labeler is a fully automatic labeler designed for high speed labeling on round bottles without losing downtime for label roll changeovers.
The fully automatic Model 1000 Vacuum Gate Labeler has a PLC interface that easily controls all machine functions. It is designed with two vacuum gates across the conveyor. When a product is sensed, a label is dispensed across the conveyor and held in place by the two vacuum gates. The container travels down the conveyor until it makes contact with the label. The vacuum gates open and allow the container to continue along the conveyor. The gates also serve as the wiping mechanism.
The Model 1200SP is a fully automatic and self-contained labeler designed to apply one or two body labels to round containers. Note that for two label applications (front and back) the labels must be alternating from the same web. This machine also is capable of applying a neck label. It precisely controls web feed and placement by utilizing Spin-in-Place labeling techniques in addition to a stepper labeling drive. Spin-in-Place means that the label starting point is referenced from the wall of the container instead of the base, which is generally a better reference point. Gripper plates are designed to the bottle diameter for increased accuracy. This machine excels in label placement accuracy.
The Model 1000FS Pressure Sensitive Labeler uses feed screw infeed to increase precision spacing, accuracy, and speed. It is designed to apply one body label only on round bottles and on one side of a rectangular bottle. It is also equipped with a servo-driven label applicator. The 1000FS precisely controls web feed and label placement through the use of a single feed screw, powerful PLC, quality photo-eye and gap sensors, and a sophisticated electronic braking drive. There is no clutch/brake mechanism that will wear out. All machine functions are controlled through the PLC interface.
The Model 1500NR Labeler is designed to apply front and back labels to non-round bottles at speeds up to 150 bottles per minute with excellent label placement accuracy. With the inclusion of our wrap station assembly, the Model 1500NR Labeler can apply single full wraps to round bottles, making it truly a versatile labeler. It is also capable of applying a neck label. The Model 1500NR Labeler has been designed for ease of use and convenience.
The Paradigm 700MB Labeler is capable of applying one or two body labels and a neck label. In the base configuration it is capable of applying one body label. These include a built-in bottle accumulation table, star-wheel mechanism for proper bottle spacing for labeling, and an extended conveyor on the infeed end. This makes the machine ideal for labeling either after filling or before filling.
Applicable labels: self-adhesive label, self-adhesive film, electronic supervision code, bar code, etc. Applicable products: products requiring labels or films on the circumferential surface. Application Industry: widely used in food, toys, daily chemicals, electronics, medicine, hardware, plastics and other industries.
This machine is used to label the adhesive label on the round bottle. It is suitable for PET bottle, plastic bottle, glass bottle and metal bottle. It is a small machine with low price which can put on desk. Applied to food, pharmaceutical, chemical, stationery, hardware and other industries.
This machine is used to label the adhesive label on the flat surface. Application industry: widely used in food, toys, daily chemicals, electronics, medicine, hardware, plastics, stationery, printing and other industries. Applicable labels: paper labels, transparent labels, metal labels etc.
Designed for filling bottles with liquids meant to be sprayed, thus the bottles are capped with spray pumps. Can work with bottles made of glass, plastic and metal. To operate the machine needs compressed air supply with a pressure of 6 - 8 Bars. Air consumption is 600 L per minute. Capacity is 50 BPM.