The machine is servo continuous motion with three axis servo motor system to easily setting up and programmable logical controller to allow additional facilities add-ons when needed. With the auger dosing system, it is suitable for powders. The packing machine could also be equipped with different dosing system according to the product conditions.
The machine is designed for packing powder products, flour, ground coffee, cocoa powder, coffee powder, granulated medicines, spices, soup mixes etc. The machine is designed for stick packages and with the servo control auger filling system. It is suitable for the stick pack coffee powder, milk tea powder, creamer, green tea powder or granular products like sugar, salt and so on.
This is a next-generation model, which has intelligent functions such as automatic film meandering correction device even in high-speed production, contamination detection by the end seal 2-axis servomotors, and film-end forecast & announcement function. Applicable bag size must be within 50 – 200 x 50 – 300 mm.
The TWJB is an ideal model, combining both "made in Japan" quality with affordability. Designed with the aim of holding costs down, the high-performance model of the TWJB, which comes factory installed with major functions, can be used "as is" and achieve optimum cost performance. Applicable bag size must be within 50 – 200 x 50 – 300 mm.
This Vertical Form Fill Seal Machine can be used to handle flat-bag, quattro-pack, and three-sided seal bag. It has robustness following the vertical pillow-pouch filling machine, and moreover, is capable of handling diverse product shapes and still fit within confined space. Changeover from flat-bag to quattro pack is easily possible by swivelling the end-seal unit. Applicable bag size must be within 40 – 95 x 45 – 130 mm.
WTT is smaller in size compared to the TWN standard machine, being 140mm lower in height. When the machine is running, operators can view the operating status and monitor the temperature, pressure, and closure location on the sealing bar. Both continuous and intermittent model are available based upon requirements. Applicable bag size must be within 50 – 200 x 50 – 300 mm.
This standard but very functional vertical form-fill-seal machine was created based on TAM's pursuit of exceptional film feeding and sealing performance. When the machine is running, operators can view the operating status and monitor the temperature, pressure, and closure location on the sealing bar. Both continuous and intermittent model are available based upon requirements. Applicable bag size must be within 65 – 250 x 50 – 300 mm.
These vertical form fill seal machines have a built in zipper device. The zipper device control box is integrated with VFFS machine that improves its maintenance ability. Applicable bag size must be within 80 – 250 x 100 – 410 mm.
This standard but very functional vertical form-fill-seal machine was created based on TAM's pursuit of exceptional film feeding and sealing performance. When the machine is running, operators can view the operating status and monitor the temperature, pressure, and closure location on the sealing bar. Both continuous and intermittent model are available based upon requirements.
This is an economical model of Auger Filling Machine. We considered its minimum “should have” features and finally achieved this solution at very affordable cost even kept as made-in Japan for most of general powder filling application. Filling range is 5 – 2000 g.