The filling and sealing machine for plastic pipes HTGF-50 is suitable for various toothpastes, cosmetics, skin care products, protective creams, ointments, etc. Productivity: 30-50 pcs/min
The filling and sealing machine HTGF-150 uses aluminum tubes for packing. The machine is used in the pharmaceutical, cosmetic and food industries. Productivity 2400-4800 units/hour
Designed to automatically fill colloid materials into metal or compound (plastic) tubes with subsequent lidding and sealing them. The machine is used in daily chemical, pharmacy, foodstuff and so on. Filling capacity is 20 – 500 ml; output is 50 pcs/min.
Model RGNF series are suitable for filling all kinds of pasty and high viscous fluid and the materials alike Into large diameter plastic and composite tubes and then internally heating tubes, sealing and printing log, number and date. It is used in the industries of pharmaceutics, foodstuff, cosmetic and so on. Filling volume is 5 - 500 ml.
A multi-purpose machine, which can fill folded or seal plastic, aluminum, lead or compound tubes. Filling capacity is 5 – 250 ml, output is 50 tubes per minute.
Tube feeding and Tube washing, marking identification, filling, hot air sealing, code printing trimming and ejecting out the tube conducted by a fully auto control system. Tube loading is controlled by mechanism and electrical, the performance is accurate and reliable. The materials contacting part is made of 316L stainless steel, clean, sanitary and conforming to GMP for medicine manufacture.
Designed for filling and sealing alu or plastic tubes with creams or ointments. Tubes and the product are fed automatically, after filling and sealing the machine embosses marking (batch number, expiry date, etc.). Filling volume: 5 – 120 g, filling precision: 99%, full stainless steel construction. Capacity: 40 – 60 bottles per minute.
Tubes are fed onto the tube holders of the rotary table by the operator. Tube orientation, filling, sealing, batch typing, tube ends cutting and tubes ejecting are automatic operation. The filling and sealing machine are separated. The ultrasonic sealing is to seal the tubes instantly. Capacity: 10 – 30 pcs/min.
This machine is suitable for filling high viscosity liquid and filler including salt or glossy chips. The filling volume is digitally displayed and can be precisely adjusted. The filling nozzle is equipped with suction back, down stroke and up stroke devices, so that the filler does not touch the tubes.
Tube feeding, filling, sealing, tube trimming, serial number typing process are automatic operation. Products will be ejected from the eject funnel. Contact type heater is used to seal tube fast. Suitable for soft plastic tubes, laminated plastic tubes, aluminum laminated tubes. Equipped with 12 working stations and tube-cutting device.