This is a device to make products into a blister pack. The blister pack is several types of pre-formed plastic packaging used for small consumer goods, foods, and pharmaceuticals such as tablet blister pack, pill blister pack, capsule blister packing, and soft gel capsule blister pack. The primary component of a blister pack is a cavity or pocket made from a formable web, usually a thermoformed plastic.
The Alu-Pvc/Alu-Alu blister-packing machine of DPPS170A takes full use of compound forming Pvc-Alu (Alu-Alu) foil as packing material to punch beautiful blisters through special punching module. After feeding, detecting, sealing, batch number printing, slitting and punching, the product made by the machine presents a fine appearance and reliable condition. Capacity is 60 cuts per min. for Alu/PVC blisters and 40 cuts for Alu/Alu blisters.
Designed for packing solid medicine, tablets, capsules, soft capsules, etc. Automatically completes PVC feeding, PVC heating PVC forming, Medicine feeding, sealing, batch number, cutting, blister output. To operate the machine needs compressed air supply with a pressure of 0.6 – 0.9 MPa. Maximal cutting speed is 200 times per minute.
Designed for packing solid medicine, tablets, capsules, soft capsules, etc. Automatically completes PVC feeding, PVC heating PVC forming, Medicine feeding, sealing, batch number, cutting, blister output. To operate the machine needs compressed air supply with a pressure of 0.6 – 0.8 MPa. Maximal cutting speed is 240 times per minute.
High Speed Alu-Pvc blister packing machine is the new high-tech production combined with domestic and abroad experiences. DPH320 adopts complete servo motor driving system, it can complete accurate control, low noise, high speed of production, easy changing of model, accordingly achieve high-efficiency automatic medicine packing, minimum personnel and material cost. To operate the machine needs compressed air supply with a pressure of 0.6 – 0.9 MPa. Maximal cutting speed is 250 times per minute.
DPP400 blister packing machine is specially designed for packing ampoules, vials and syringes. Its max. cutting speed is 30 cuts/min, max. forming depth is 35 mm, max. forming area is 390 x 150 mm.
Designed for packing products into blisters with a punch frequency 10 – 35 punches per minute. The machine uses the newest type of power transmission mechanism, driven by the main drive shaft row chain, eliminating errors and other gear noise. To operate the machine needs a compressed air supply with a pressure of 0.6 – 0.8 MPa.
This tablet and capsule Blister Packing Machine is widely used in the pharmaceutical industry for packing capsules and tablets. The machine adopts a flat plate structure, has pressing, forming, mesh heat sealing, adjustable stroke, and is suitable for small volume and convenient operation. Suitable for capsules, tablets, candy, health care, small hardware and other aluminum-plastic packaging. To operate the machine needs a compressed air supply with a pressure of 0.4 – 0.6 MPa.
Controlled by German Siemens PLC, parameters are set via Willen touchscreen. Very convenient adjustment of stroke saving a lot of time and packaging materials. All contact parts are made of stainless steel and high-quality materials, with high surface treatment and outstanding texture. The machine can pack in ALU/ALU and ALU/PVC blisters.
This high speed packing production line integrate the blister and box production into one, which is a combination of light, machine, electricity, gas, and controlled by the intelligent PLC system. Aluminium-plastic blister packaging machine adopts advanced process, automatic folding instruction and medicine plate to automatically complete continuous operation of the medicine and carton packaging job. Punching frequency is 20 – 50 times per minute.
