SED-120J Fully Automatic Capsule Filling Machine is used to fill powder, grain and tablets. It is suitable for automatically completing capsule feeding, separating, filling, (waste capsule rejecting), closing, finished product ejecting for powder or tiny pill medicine in capsules. It is designed according to GMP standards.
The special design realizes precise filling of micro-dosing powder, which can fill 10-50 mg powder in capsules No. 000-5. The special device is used for filling light foam powder and viscous powder. Make filling of the powder, which is difficult to be mixed powder into the same capsules.
SED-2000J automatic capsule filler processes the products for optimal productivity up to 200,000 capsules per hour, featuring low-maintenance operation and minimal downtime. Powder dosing uses the 5 stage tamping technology for an enhanced accuracy. Filling of pellets is available.
The SED-3800J automatic capsule filler processes the products for optimal productivity up to 3,800 capsules per hour, featuring low-maintenance operation and minimal downtime. Powder dosing uses the 5 stage tamping technology for an enhanced accuracy. Filling of pellets is available.
SED-1200J adopts PLC control system, human-machine interface, when running malfunction or lack of stuff, automatic alarm, malfunction display, automatic dismiss alarm. In addition, with functions of password setup, touching screen display, automatic parameter setup, data printing, reset, etc. Output is 1,200 capsules per minute.
Designed for filling empty capsules and equipped with independent empty capsule feeding station, powder feeding station and capsule closing station. Can work with hard capsules 00 – 4 in size. Output is 20,000 capsules per hour.
Designed for filling empty capsules and can finish the following motion at same time: capsule feeding, capsule separating, powder filling, capsule rejecting, and capsule locking, and finished capsule discharge and die hole cleaning. Can work with hard capsules 00 – 5 in size. Outputs depending on the model are 24,000, 36,000 and 48,000 capsules per hour.
Designed for filling empty capsules and can finish the following motion at same time: capsule feeding, capsule separating, powder filling, capsule rejecting, and capsule locking, and finished capsule discharge and die hole cleaning. Can work with hard capsules 00 – 5 in size. Outputs depending on the model are 54,000, 60,000 and 72,000 capsules per hour.
NJP Fully Automatic Capsule Filling Machine is filled by powder/grain/tablet, It adopts multi-bore dosing, intermittent motion and timing frequency conversion. It is suitable for automatically completing capsule feeding, separating, filling, closing, finished product ejecting for powder or tiny pill medicine in capsule. Output: 3500 pcs/min
The DTJ-V semi-automatic capsule filling machine is a special capsule filling machine that is suitable for medium and small pharmaceutical factories, hospital preparation laboratories, etc. The machine is made of stainless steel and is suitable for a capsule that is filled with powder and grain.
