瓦楞盒机器

The machine can perform box opening, forming, and bottom folding. And now the lower part of the tape is completed, the cardboard box is opened, the bottom of the box is folded according to a certain procedure, and the tape is sealed and sent to the special equipment of the packing machine. PLC controlled; parameters are set via HMI on a touchscreen.

This machine can open the flat carton and seal the bottom automatically. It could be used individually or combined with the carton packaging machine. It is widely used in food, chemistry and daily products industries etc. Speed: 12 carton/min

Designed for carton case erection. PLC controlled, parameters are set via HMI on a touchscreen. The erected cases must be within 300 x 400 x 350 mm in size. To operate the machine needs compressed air supply with a pressure of 6 - 8 Bars. Air consumption is 800 L per minute.

The machine can erect cartons out of supplied dummies. Cartons are fixed with tape, applicable tape width is 48, 60 or 75 mm. Capacity is 8 – 10 cartons per minute. Applicable carton size must be within 250 – 650 x 150 – 400 x 100 – 350 mm. To operate the machine needs compressed air supply with a pressure of 6 kg/cm3. Air consumption is 450 NL per minute.

Advantage Machinery offers a variety of case erecting solutions. Starting with our entry level CE-25AF, which is an efficient and easy to use automatic Case Erector. The machine has a non-stop loading system for the folded boxes. The machine use a PLC to control all of the funtions of the machine. The machine first opens up the folded box, then folds the 2 short bottom flaps followed by the 2 short long flaps. The box is then pushed into the taping section where the bottom of the box is taped. The machine can be integrated with our CS-TSC to make an efficient production line. Different models are available, including high speed, servo controlled size changes, automatic load, gluing system, case formers, drop packers, case loaders, stainless steel models and much more.

Advantage Machinery offers a variety of case erecting solutions. Starting with our entry level CE-12A, which is an efficient and easy to use automatic Case Erector. The machine has a non-stop loading system for the folded boxes. The machine use a PLC to control all of the funtions of the machine. The machine first opens up the folded box, then folds the 2 short bottom flaps followed by the 2 short long flaps. The box is then pushed into the taping section where the bottom of the box is taped. The machine can be integrated with our CS-TSC to make an efficient production line. Different models are available, including high speed, servo controlled size changes, automatic load, gluing system, case formers, drop packers, case loaders, stainless steel models and much more.

Advantage Machinery offers a variety of case erecting solutions. Starting with our entry level CE-25A, which is an efficient and easy to use automatic Case Erector. The machine has a non-stop loading system for the folded boxes. The machine use a PLC to control all of the funtions of the machine. The machine first opens up the folded box, then folds the 2 short bottom flaps followed by the 2 short long flaps. The box is then pushed into the taping section where the bottom of the box is taped. The machine can be integrated with our CS-TSC to make an efficient production line. Different models are available, including high speed, servo controlled size changes, automatic load, gluing system, case formers, drop packers, case loaders, stainless steel models and much more.

The Advantage Machinery CE-10M is a semi-automatic carton erector which is highly efficient and easy to use. The folded cases are conveniently staged on the back side shelf. An operator grabs the folded boxes and opens them; the opened cases are pushed onto a support plate where the bottom flaps are folded. The Case is held in place while the operator fills it. Once the case is filled, the operator presses the foot petal which pushes the case in the case sealer or strapping machine.