The C-Series provide the structural integrity to deliver the performance their designer intended. From the moment a blank enters our case erectors' magazine until it exits the case erector as a properly formed and bottom sealed case, it is under complete control. A unique pickup frame pulls the case from the magazine and forces it to open so it is square. The flaps are folded before the case moves, making it rigid and locking in its “squareness”. A pusher bar, parallel to the rear wall, delivers it to spring-loaded side belts, which move in or out to compensate for variations in width, and carry it over the sealing device.
XT-40 is suitable for molding and sealing boxes of the same size. If you need to change the size of the box, the operator must manually adjust the machine. The machine is designed so that the molding, folding and sealing process is carried out simultaneously. Cardboard blanks can be added at any time without stopping the machine.
XT-40H18 is suitable for molding and sealing boxes of the same size. If you need to change the size of the box, the operator must manually adjust the machine. The machine is designed so that the molding, folding and sealing process is carried out simultaneously. Cardboard blanks can be added at any time without stopping the machine.
XT-40H25 is suitable for molding and sealing boxes of the same size. If you need to change the size of the box, the operator must manually adjust the machine. The machine is designed so that the molding, folding and sealing process is carried out simultaneously. Cardboard blanks can be added at any time without stopping the machine.
The carton erector machine can finish the work of carton opening, shaping, folding and sticking the adhesive tape in the bottom of the carton. Applicable carton size is 250 – 450 (L) x 150 – 400 (W) x 100 – 400 (H). Productivity is 8 – 12 cartons per minute. To operate the machine needs compressed air with pressure 5 – 6 kg/cm3.
This carton erector has been awarded several patents, and has received approval from famous industries around the world. Fully cam driven continuous system assures positive and stable motion with maximum stability. Variable speed adjustment for carton forming and sealing. Easy to operate and adjust. No damage on carton.
The machine is equipped with vertical storage, cartons can be added at any time without stopping the machine. Suitable for forming and sealing cartons of the same size. Changeover requires manual adjustment. Case erector adopts advanced photoelectric control system. Rationally designed, the forming, folding and sealing processes are accomplished simultaneously.
Works with cartons within the following dimensions: (L)200-450*(W)150-400*(H)100-350mm, sealing speed: 8-12 ctns/min., tape width: 48-75mm. The machine can be supplied with CE certificate. Used in chemical fiber, beverage, oil refining, papermaking, electric power, power plant, food, pharmaceuticals, etc.
Works with cartons within the following dimensions: (L)200-450*(W)150-400*(H)100-350mm, sealing speed: 15 ctns/min., tape width: 48-75mm. The machine can be supplied with CE certificate. Used in chemical fiber, beverage, oil refining, papermaking, electric power, power plant, food, pharmaceuticals, etc.
Works with cartons within the following dimensions: (L)280-500*(W)200-400*(H)90-450mm, sealing speed: 20 ctns/min., tape width: 40-75mm. The machine can be supplied with CE certificate. Used in chemical fiber, beverage, oil refining, papermaking, electric power, power plant, food, pharmaceuticals, etc.