Designed for filling bottles with liquids with subsequent capping. Can work with bottles made of glass, plastic and metal. To operate the machine needs compressed air supply with a pressure of 6 - 8 Bars. Air consumption is 600 L per minute.
Designed for filling bottles with liquids with subsequent capping. Can work with bottles made of glass, plastic and metal. To operate the machine needs compressed air supply with a pressure of 6 - 8 Bars. Air consumption is 300 L per minute.
Production capacity is 20 - 120 bottles / min. Number of filling heads: 4, 6, 8 or 10 filling heads (according to capacity). Possible filling ranges are 10 - 30 ml, 30 - 500 ml, 500 ml - 2 L. Filling precision: ± 1% to 2%. Capping rate is ≥ 98%. Power supply: 380V 50Hz. PLC controlled, parameters are set via HMI on a touchscreen.
Can fill bottles or cans with liquids. Production capacity is 15 - 22 bottles or cans per minute. Possible filling ranges are 10 - 30 ml, 30 - 500 ml, 500 ml - 2 L. Applicable bottle diameter is 35 – 125 mm. Power supply: 220V/380V 55/60Hz. PLC controlled, parameters are set via HMI on a touchscreen.
This machine is designed for the filling and sealing of oral liquid of 10-20ML. It is mainly used for filling, capping and sealing of easy-to-pull straight bottle. This model has low speed, medium speed and high speed three kinds of yield for your choice. Speed: 300 BPM
GXT-4 Filling Capping Labeling Machine is made of high-quality stainless steel SUS304, with excellent anti-corrosion performance. This production line is suitable for the filling production of small batch multi-gauge, liquidity or viscous materials. Production capacity: 1000 bottles/hour
No-drip filing nozzles, which can protect the cylinder on the top being damaged by material. Easy to operate, no bottle no filling, auto orientation detection. Applicable bottles are 20 – 100 ml. Water pressure is 0,3 – 0,5 MPa. Production speed is 50 – 220 BPM.
The machine is designed for filling bottles with products and capping them. It is ideal for production of IV solution, glucose filled into plastic bottles. Equipped with a servo drive and is stable during high-speed movement, the positioning is accurate, durable, and the maintenance cost is low.
This production line is suitable for Vial washing, Drying and sterilization, Powder filling and stoppering, Capping. It is widely used for drugs, Health products etc. Production line is composed of Vertical ultrasonic washing machine, Hot air circulation tunnel, Powder filling and stoppering machine, Capping machine. It can be connected to production line or used as a stand-alone unit.
The core design of this liquid filling machine series is to use the combination of advanced PLC control system and high accuracy peristaltic pump, which ensures the accuracy of the filling volume. With the exact amount of liquid filled in, rubber stopper will then be automatically sealed on top of each vial.