Automatic injection vial filling machine for 7-30 ml vial consists of turntable, linear conveyor system, graduator, 4 head filling device, roller type stoppering servo motor driver the 4 filling auger to fill with the help of graduator position system. Filling capacity is 80 – 100 vials per minute.
This machine adopts single row synchronous belt for conveying, and servo motor control for following movement: filling needle up and down & fro and back, integral type sucker plugging and outfeed. It can automatically finish procedures of vial orienting, conveying, (pre-nitrogen), filling, (post-nitrogen), stopper orientation, plugging etc. For the plugging, it can do full plugging and half plugging.
After dried and sterilized vials go to turntable of this filling machine, where they will be fed by conveyor into U type slot of main disk, and will rotate together with the main disk through filling station and stoppering station. At filling station, peristaltic pump will absorb solution in silicone tube and feed it into vial. At stoppering station, vibration hopper will convey stoppers along chute arrive terminal position, then pressing head will press each stopper onto mouth of vial.
This machine is suitable for liquid/powder metering and packing. Such as penicillin powder, collagen powder, pesticide powder, injection, essence, hyaluronic acid etc. PLC controlled, parameters are set via HMI on a touchscreen. High precision screw or peristaltic pump control, high filling accuracy. Production speed can be adjusted, automatic counting.
The glass infusion bottle enters the filling part in the way of fixed distance and bottle separation after passing the bottle feeding track and twisting into the bottle. The filling is measured by the principle of time and constant current. The filling amount is set and adjusted by the touch screen, and the measurement is stable and accurate.
The machine uses German advanced technology, engineering and technical personnel by the company independently developed specifically for liquid filling and capping. Filling part of the machine can be used 316L stainless steel injection pump filling. PLC controlled, parameters are set via HMI on a touchscreen. The machine design is reasonable, reliable, easy to operate and maintain, in full compliance with GMP requirements.
Designed for filling, stoppering, capping and labeling vials in pharmaceutical industry. Using straight-line stoppering will not disrupt laminar flow, can fully avoid rotation filling block of laminar flow and mixed flow caused by rotation, turbulence, avoid cross contamination risks, so the line meets the new GMP requirements. Applicable vials must be within 2 – 100 ml in capacity.
Filling and sealing machine for ampoule Model SLAG-2A is equipment specialized in filling and sealing 1ml to 2ml, 5mlto10ml, and 15-20 ml bottle in pharmaceutical works. This machine is equipped with automatic stop-filling device which can make filling case when there is no ampoule into filling station.
The machine is mainly used for washing, filling and sealing of PP bottle infusion. It is suitable for hot sealing of combined cap, it includes ion wind washing unit, WFI washing unit, time-pressure filling unit, sealing unit/ capping unit. Production capacity for 250 ml bottle: 8,000; 10,000; 12,000 bottles/hour.
This equipment is widely applied in the industry of agricultural, pharmaceutical, food, and chemical for the filling of pesticides, oral solution, perfume, cosmetics, liquid, and fruit pulp etc. PLC controlled, parameters are set via HMI on a touchscreen. The machine fully corresponds to GMP standards.