The line for oil filling is designed for complex solution of the problems of dispensing the product, orienting the lids (2 sizes), capping glass and plastic containers of 30, 50 and 100 ml with aluminum screw and plastic caps at the same time, with minimal readjustment (2 capping heads) as well as subsequent labeling and marking containers. The machine is used to equip food, cosmetic, pharmaceutical, veterinary and chemical enterprises. Output is 2,000 pcs/h.
The line is designed for filling alcohol products in glass or plastic containers of 30, 50 and 100 ml, capping containers with aluminum or plastic screw caps (2 sizes) and applying labels. The machine is used in the pharmaceutical, cosmetic, food and chemical industries. Output is 2,000 pcs/h.
The line for alcoholic tinctures is designed to rinse and dry containers, dispensing products into vials with their subsequent sealing with plastic caps and labeling. The line meets all the necessary requirements of GMP and GPP and can be used in pharmaceutical and cosmetic production. Output is 5,000 pcs/h.
The line is designed to implement the full cycle of packaging hot syrups and toppings into bottles - rinsing containers, filling the product and capping it with subsequent unloading on a storage table. The unit is designed for food industry companies, but can be adapted for usage in pharmaceutical industries, cosmetic factories and other industrial areas. Output is not more than 2,000 pcs/h.
This filling line is the best solution for equipping small and medium pharmaceutical industries. The machine is designed specifically for filling drugs and meets the regulatory requirements of GMP (GOST R 52249-2004) for medical equipment. The modularity of the architecture allows operation of the dispenser, capper and washer both as a part of the line and as stand-alone units. Output is 1,000 pcs/h.
The automatic line is designed for filling, sealing and labeling medium viscous, thick cosmetic and pharmaceutical products, for example, creams, gels and lotions. The line can also work with other liquid, medium-viscous and thick products from other industries, such as veterinary drugs. The equipment meets the basic regulatory requirements of GMP. Output is 3,000 pcs/h.
The filling line is designed for dosed supply of alcohol products into vials, as well as for the following operations: rinsing, drying, capping, labeling, dating and group packaging. The product can be used in chemical and pharmaceutical industries, meets all the necessary GMP requirements. Output is 6,000 pcs/h.
Monoblock "Master" for filling and capping pharmaceutical solutions is intended for aseptic dosed filling of infusion solutions, subsequent capping of vials with rubber stoppers and rolling with aluminum caps. The equipment is used in the pharmaceutical industry. Output is 1000 pcs/h.
Monoblock "Master" for dispensing drugs is designed to automatically perform a number of technological operations: filling product, installing plastic dispenser into the bottle mouth, covering the bottle with the lid and capping the bottle. The equipment is used at the production sites of companies manufacturing pharmaceutical and veterinary products. Output is 3000 pcs/h.
The filling & sealing monoblock “Master” for glass bottles with screw necks combines flexibility due to the optimal distribution of functions and the wide versatility achieved by the possibility of readjustment for another type of container. The monoblock is used in pharmaceutical, food and chemical industries for production of drugs, still water, juices and general-purpose chemicals. Output is 2,000 pcs/h.
