The TWJB is an ideal model, combining both "made in Japan" quality with affordability. Designed with the aim of holding costs down, the high-performance model of the TWJB, which comes factory installed with major functions, can be used "as is" and achieve optimum cost performance. Applicable bag size must be within 50 – 200 x 50 – 300 mm.
This Vertical Form Fill Seal Machine can be used to handle flat-bag, quattro-pack, and three-sided seal bag. It has robustness following the vertical pillow-pouch filling machine, and moreover, is capable of handling diverse product shapes and still fit within confined space. Changeover from flat-bag to quattro pack is easily possible by swivelling the end-seal unit. Applicable bag size must be within 40 – 95 x 45 – 130 mm.
This standard but very functional vertical form-fill-seal machine was created based on TAM's pursuit of exceptional film feeding and sealing performance. When the machine is running, operators can view the operating status and monitor the temperature, pressure, and closure location on the sealing bar. Both continuous and intermittent model are available based upon requirements. Applicable bag size must be within 65 – 250 x 50 – 300 mm.
WTT is smaller in size compared to the TWN standard machine, being 140mm lower in height. When the machine is running, operators can view the operating status and monitor the temperature, pressure, and closure location on the sealing bar. Both continuous and intermittent model are available based upon requirements. Applicable bag size must be within 50 – 200 x 50 – 300 mm.
This standard but very functional vertical form-fill-seal machine was created based on TAM's pursuit of exceptional film feeding and sealing performance. When the machine is running, operators can view the operating status and monitor the temperature, pressure, and closure location on the sealing bar. Both continuous and intermittent model are available based upon requirements.
These vertical form fill seal machines have a built in zipper device. The zipper device control box is integrated with VFFS machine that improves its maintenance ability. Applicable bag size must be within 80 – 250 x 100 – 410 mm.
This is an economical model of Auger Filling Machine. We considered its minimum “should have” features and finally achieved this solution at very affordable cost even kept as made-in Japan for most of general powder filling application. Filling range is 5 – 2000 g.
The machine is suitable for filling important powders, flavourings, coffee powder, flour, etc. Packing speed is 35 – 50 bags per minute. Powders are filled in three side or back side seal bags. Available filling ranges are 1 – 20 g, 2 – 50 g, 10 – 100 g.
Vertical Form Fill Seal machine forms bag from film and fills an assortment of products such as powders, granules, and pieces, which come in a variety of shapes and kinds of foods such as candies, coffee beans, frozen foods and snacks by dropping vertically. Maximal capacity is 120 BPM.
The full automatic tube packaging machine is a servomotor-drive high technology machine which is manufactured for packaging sugar, salt, spices, etc. It is a full automatic machine with the dosage system prepared for the product. The option of box filling which can be added to the end of the machine.
