The TM-21 Madison Tape Bander is the ideal solution for a multitude of industrial tape applications. As an orbital tape applicator, the TM-21 applies virtually any kind of tape in adhesive levels from micro-adhesive (releasable) to permanent around the entire product. This is an ideal solution where traditional metal banding or poly-strapping creates less than ideal desired results.
The MPT Series stretch film banders create the highest bundle integrity at the lowest per bundle cost for virtually all your bundle configurations and banding needs. MPT Series banders use a banding material that is a fraction of the cost of other banding consumables; often providing an ROI solely on consumable savings in less than six months. The MPT-17 is designed and manufactured to require no preventive maintenance. By using the highest quality, precision machined components, each Madison Bander can perform even under the most demanding production environments.
The MPT Series stretch film banders create the highest bundle integrity at the lowest per bundle cost for virtually all your bundle configurations and banding needs. MPT Series banders use a banding material that is a fraction of the cost of other banding consumables; often providing an ROI solely on consumable savings in less than six months. The MPT-19 is designed and manufactured to require no preventive maintenance. By using the highest quality, precision machined components, each Madison Bander can perform even under the most demanding production environments.
The Array Pack AP-25 is a fully automated carton stacking and banding system that offers revolutionary versatility, performance and reliable operation. The AP-25 stacker collects product from an up-stream operation such as a carton filler machine in its first stage position until a predetermined count is achieved. From there, products are either indexed into the banding position or shifted over for the next column/row of product to be stacked. Once the entire bundle is accumulated, it's indexed into the banding position by a high-speed stepper motor.
The SB-25 offers a new and better way to sort stack and band a variety of products. The unit collects products into a 2-stage stacker from an up-stream operation (such as a card affixing table or binding machine) until either a predetermined count is reached or a sort signal is received from the up-stream equipment. Product is then dropped into the push position and indexed into the banding position. The pusher is driven by a high speed stepper motor. The SB-25 comes loaded with an in-feed conveyor, single drop accumulator, and stepper drive pusher.
SA-116 sleeve type sealing machine (including shrink tunnel) is suitable for group packing bottles, such as water, beverage of canned food. Available with transparent PE shrink film (each Top and Bottom film cradle) OR printed PE film (only Top film cradle). Its speed could up to 14 packs per minute based on 330ml can by package matrix of 3x2.
SA-106-1 sleeve type sealing machine (including shrink tunnel) is suitable for group packing bottles, such as water, beverage of canned food. Available with transparent PE shrink film (each Top and Bottom film cradle) OR printed PE film (only Top film cradle). Its speed could up to 44 packs per minute based on 330ml can by package matrix of 3x2.
The machine is designed to wrap cartons with plastic bands. It provides increased productivity, reduced manual labor, process efficiency and securely and neatly closes cartons, making it a great choice for all packaging needs. Suitable for all-purpose carton sealing. Steady sealing, high performance.
Imported PLC controls the whole machine. Driver motor and air-cylinder are Taiwanese made, belts are imported from Italy. The height and the width for different sizes of cartons are adjusted manually. It can be produced both steel and stainless steel types, depending on the customer’s instructions. Productivity is up to 6 cartons per minute.
Ideal for integration with systems such as an inline receding offset stacker, three knife trimmer, product feeders, lugged conveyors, or other such applications. The WK04-30ABE easily rolls up to your system and with a few adjustments is ready to start saving you time and unwanted handling of loose product.