LDF Series Pharmaceutical Bin is one of the most popular shifting containers used in the producing flow of solid dosage. Different processing crafts for solid materials can be operated in the same container. The frequent charging and discharging of materials are reduced thus avoiding the dust and cross pollution. It’s conformity with GMP requirements.
This machine is used to dry bottles before labeling. The machine is simple, maintenance is easy and is peculiar for its effectiveness. Output: 1200 – 3000 bottles per hour. Suitable bottles: 50 ml and above. Power supply: 380V, 50Hz.
This machine is applied in the sterilization and drying various plastic plug, aluminum lid and antibiotic bottles. Heat is generated with a stainless electric heating pole and thermal wind circulation is provided by straight fanner machine. The temperature rises quickly with efficient sterilization. Temperature adjustment range: 50 – 350 oC. Power supply: 380V 50Hz.
Digital P.I.D. temperature control. Automatic cool down circuit. No maintenance mesh belt. Adjustable air dampers. High velocity blower. Heat ducted to all 4 sides, top and bottom. Variable speed 0-120 fpm conveyor. Easy access slide out control panel. Long life heavy duty Cal rod heaters. Durable electro-static powder finish. 16000 – 32000 watts of available heat. Emergency stop buttons.
Digital P.I.D. temperature control. Automatic cool down circuit. No maintenance mesh belt. Adjustable air dampers. High velocity blower. Heat ducted to all 4 sides, top and bottom. Variable speed 0-120 fpm conveyor. Easy access slide out control panel. Long life heavy duty Cal rod heaters. Durable electro-static powder finish. 12000 – 28000 watts of available heat. Emergency stop buttons.
Digital P.I.D. temperature control. Automatic cool down circuit. No maintenance mesh belt. High velocity blower. Variable speed 0-60 fpm conveyor. Heat ducted to all 4 sides, top and bottom. Easy access slide out control panel. Durable electro-static powder finish. 400 watts of available heat. Emergency stop button.
Digital P.I.D temperature control. Automatic cool down circuit. No maintenance mesh belt. Adjustable air dampers. High velocity blower. Heat ducted to all 4 sides, top and bottom. Variable speed 0-120 fpm conveyor. Easy access slide out control panel. Durable electro-static powder finish. 800 watts of available heat. Emergency stop button.
Table top. Bottom heated solid conveyor belt. Heat ducted to top & sides. Thermostatic temperature control. Variable speed 0-30 fpm conveyor. Standard single plug for portability. Durable electro-static powder finish. 2900 watts of available heat.
Half-stack pallets are placed into the depalletizer frame using a forklift or pallet jack. Once inside the frame, the operator will cut and remove the shrink wrap, exposing the top layer of bottles. An operator interface will allow the user to start the process, and the pallet will be raised to the correct level so that the base of the top layer is level with the feed table. A motorized pusher bar will engage and push bottles out onto the feed table, starting and stopping as bottles are needed. Bottles will transfer out onto the feed table, and from there be fed onto the right-angle conveyor. The table, conveyor and pusher belt turn on and off automatically based on a downstream photoeye indicating the need for bottles. If the line is full the system waits until bottles are needed and then restarts.
PLC controlled, parameters are set via HMI on a touchscreen. The machine is equipped with counting and display functions. The transmission system structure is simple, operates stably and is fitted with a shutdown device when there are no bottles. The machine activates automatically when bottles are detected.