Designed to tight & seal the caps on bottles made of PET / GLASS / Aluminum / HDPE. It can cap 1,800 – 2,400 bottles per hour. Bottle gripping is achieved by means of pneumatic system. Caps are fed by vibratory bowl feeder.
Designed to seal PET / GLASS / Aluminum / HDPE bottles with metal ROPP caps. It can cap 1,800 – 2,400 bottles per hour. Bottle gripping is achieved by means of pneumatic system. Caps are fed by vibratory bowl feeder.
Designed to tight & seal the plastic and metal caps on bottles made of PET / GLASS / Aluminum / HDPE. It can cap 1,800 – 2,400 bottles per hour. Bottle gripping is achieved by means of pneumatic system. Product contact parts are made of SS 304.
The machine is designed to label flat surfaces made of PET / HDPE / GLASS / TIN Aluminum. It can label 2,400 – 6,000 products per hour. Maximum label size is 190 x 225 mm.
The machine is designed to apply self-adhesive sticker labels on Round Products having small diameter. This Machine gives Full Wrap around & Partial Wrap around look to the products as per requirement. Controlled by PLC
The machine structure is made of SS 304; application can be either U-type or L-type. The machine is equipped with PLC based operating system for easy operation. Output is from 80 to 120 products per Minute, depending on the size of labels and products.
The machine structure is made of SS 304; the operator places the bottle manually on the specially designed roller stand and uses foot switch thus commanding the dispenser to apply label after preset time. The machine is equipped with PLC based operating system for easy operation.
The machine is used label PET / HDPE / GLASS / METAL / Aluminum bottles with wrap around labels. Applicable labels are Self Adhesive Sticker Labels in Roll Form having consistence 2 or 3 mm gaps between the 2 labels. Maximum label size is 190 x 225 mm. Machine is equipped with PLC and a touchscreen for setting parameters.
Designed to wrap filled and capped containers into shrink film. Maximum pack size ix 450 x 300 mm. The machine is PLC controlled and is equipped with a control panel for setting parameters. To operate the machine needs compressed air.
The machine is designed to pack prewrapped soap cakes or similar products in Heat- treated Biaxial Oriented Poly Propylene film. Output is up to 20 packs per minute. For operation the machine needs dry compressed air with a pressure of 6 kg per cm2.