Shun-Yi Machinery Engineering Co., Ltd.

The washing operation of model VLW-100 vial washing machine is based on a set of seven timers, which control the duration of each washing process and the flow of different washing media via five inlet ports. Timers are readily adjustable to obtain a washing duration from 0.1 to 99 seconds. Vials in inverted position, resting on two or three stationery washing trays, undergo one external and up to four internal flushing.

Model CP-100 / CP-20D Automatic Vial Capper is designed either to couple with a vial filling & stoppering machine to complete an in-line operation or to operate independently. It is a reliable cap closing machine to apply aluminum seal to serum vial at speeds up to 120 units per minutes

Fine and solidly constructed for clean and trouble free long-term operations following all requirements for aseptic production; all stainless steel contact and cover surfaces, all lubrication and service points in lower compartment, complying cGMP regulations. Fine-Setting fill pumps ensure most accurate liquid dosing.

Model VF-20 & VF-100 Automatic Vial Filling & Stoppering Machine is the latest model designed to meet the pharmaceutical industry demands for filling injectable liquid into glass vials. In compliance with the latest PIC/S GMP regulations, an individual Automatic Vial Capper Model CP-20 can be coupled to complete the continuous line operation.

CLQ-20 is a computerized machine for precise dosing of liquid and creamy materials. The equipment is equipped with automatic, manual and pedal control functions, which increases the convenience and efficiency of production. The ability to integrate with peripheral devices allows for full automation of the process and reduces the use of labor. Filling speed: 10-30 bottles per minute

The VPF-TCI Automatic Vial Powder Filling & Stoppering Isolator is used for vial powder filling and stoppering. Supports vials Ø22-30mm, height 35-75mm. Output 60-100 pcs/min. Filling range 40-2000 mg (4 dosing discs). Accuracy ±3% of 1 g may depend on the material. Powder sample testing is required. Suitable for pharmaceutical and cosmetic industries.