The Pallet Zero-Pressure Accumulation Conveyor is a horizontal Belt-Driven Live Roller Conveyor designed to transport heavy loads. Applications vary from manufacturing to distribution operations. The pallet conveyor system is also available as a zero-pressure accumulation conveyor with electronic sensors.
The 90-Degree Pallet Transfer Conveyors are ideal for right angle transfer of pallets or loads from chain conveyors, chain-driven live roller or belt-driven live roller onto a chain conveyor. Several standard combinations are available: two, three or four strands of 3/4" pitch, precision conveyor chains. Special "C" shape of UHMW wear strips are used to support the chain. Pneumatic air bags and a special linkage mechanism enable accurate and smooth lifting and lowering of pallets, drums, etc.
The 90-Degree Turntable Conveyor is used to rotate products at 90 degrees. Powered CDLR transition rollers, mounted on the turntable deck's apron, help move the product on and off the turntable. Optional transition gravity roller sections (to fill gaps created by radius of turntable) are available.
Premier Tech Chronos transportation chain conveyors are constructed with welded frames consisting of 7ga formed steel rails and structural steel cross members. Standard hollow shaft Dodge Tigear 2 reducers and Baldor motors are shaft mounted to the chain conveyors drive shaft. The drives are centrally located allowing the chain conveyors to be properly used in reversing applications. The load is conveyed with RC80 chain supported by UHMW wear strips.
Premier Tech Chronos transportation chain driven live roller (CDLR) conveyors are constructed with welded frames consisting of 7ga formed steel rails and structural steel cross members. Rollers are 2-1/2” diameter tubing with welded sprockets, 11/16” spring-loaded hexagon thru-axles, precision bearings are pressed in and swedged. Rollers will be equally spaced on 3 1/4", 4", or 6” centers, with every roller being driven with individual chain loops. The roller to roller chain drives are fully enclosed in an 11ga chain guard. Standard hollow shaft Dodge Tigear 2 reducers and Baldor motors are shaft mounted to the CDLR’s drive roller.
The Chain-Driven Live Roller Conveyor is designed to convey heavy loads such as loaded pallets or drums. This heavy-duty chain conveyor is perfect to convey pallets, drums and a wide variety of heavy units. Many features such as rollers, gear motors and width can be adapted to the customer's.
The In Line Turntable Conveyor is designed to enable 90-degree rotation of a heavy load. Pneumatic air bags and a special linkage mechanism of this turntable conveyor enable accurate and smooth lifting and lowering of pallets, drums, etc.
Premier Tech Chronos transfer conveyor consists of a section of chain transportation conveyor under a companion CDLR section. These conveyor sections are contained inside a welded structural channel frame housing a pneumatic wedge lift mechanism which raises and lowers the chain transportation conveyor through the roller spacing in the companion CDLR section. Optional pop-up load stops can be added for squaring loads and guaranteeing pallet positioning prior to transferring the pallet load.
Premier Tech Chronos turntables comes standard with a section of CDLR mounted on top of the table. The conveyor’s rails are bolted to the table, and consist of 2 ½” diameter tubing rollers mounted to the rails with 2 hole flanged bearings on both ends. The rollers are placed on 3” centers with every roller being driven. The table is supported on heavy duty casters and is rotated by a chain drive. A Dodge Tigear 2 shafted reducer, 480V brake, and Baldor motor is used to control the turning of the table.
The belt and chain conveyors can be used to collect, transport or stockpile a wide variety of bulk materials. Whether you are looking for a troughed belt, a flat bed, a cleated belt, a drag chain or a steel apron conveyor, Premier Tech Chronos offers a complete range of bulk conveyor lines for standard or heavy-duty applications.