Vial filling and plugging machine for the application of round Vial bottle or similar ones, auto accomplish product filling, plug unscrambling, plug placing. The machine is composed of a load turntable, conveyor, peristaltic pump &fill nozzles, plug sorter, Plug placer system. The bottle loading/unloading is done manually, through loading turntable Ø500 mm, or able to directly from a production line. It is designed and made accordance to GMP regulation.
AGF automatic gravity liquid filling machine is PLC controlled, parameters are set via HMI on a 6± LCD touchscreen. It applies to pharmaceutical, foodstuff, pesticides, chemicals, etc. Filling range is 50 – 5000 ml or 50 – 1000 ml depending on the model. To operate the machine needs compressed air supply with a pressure of 0.4 - 0.6 MPa.
This machine is suitable for needle-insert filling in the opening diameter of bottle less than 1.8mm. Piston pump filling system to fill precise. This machine can auto finish bottle orienting, filling, cap adding, cap screwing and outfeeding. Fully meets the requirements of GMP.
This automatic filling capping and labeling machine is a full production line machine to pack. Auto filling capping and labeling machine is widely used for filling bottles and jars of different volumes, shapes and materials. It can be customized according to the requirements of our customers. We can also add it with capping machine, labeling machine, even some other processing equipment to make it a complete production line.
The machine is mainly used for filling vials with liquids and capping the filled vials. Applicable bottle height is 10 – 100 mm. Production capacity with vails 250 ml is 1200 – 2400 vials per hour. All contact materials and some related parts of the whole machine are made of high-quality stainless steel, and the parts that need to be cleaned are all quick-change devices, which is easy to disassemble and wash.
The pneumatic cream tube-filling machine controlled by air compressor, this machine used to fill plastic tubes, and is connected with a conveyor. It can fill water, honey sugar, acid cheese, fruit juice, shower gel, gear oil, liquid coffee, ink, eye shadow, fluid tea, shampoo, glue, food/paint, washing hand fluid, cream, milk, liquid soap, butter, syrup, plant oil, etc.
Sanitary grade semi-automatic show gel filling machine piston is suitable to fill the honey materials with high viscosity and poor flow ability. It does the filling pneumatically, its hopper and the cylinder both are thermally preserved with electrically heated circulation water. The machine is easy to clean and operate, it corresponds to GMP standards.
This machine is mainly used for automatic bottle unscrewing and capping of plastic bottle reagents. This machine adopts automatic bottle sorting, flat positioning upper mandrel, positioning gland, reasonable design; working table is protected by stainless steel material, and the whole machine meets GMP requirements.
The machine is designed to fill bottles and jars with products of various viscosity, ranging from water thin liquids to thick creams. They are used in cosmetic, food, pharmaceutical, oil and specialty industries. These inline piston-filling machines come complete with two to twelve fill heads, a variable speed drive conveyor, adjustable heavy-duty stainless steel frame, an easy to operate control panel.
It is widely used in precision, quantitative loading / dilution of pharmaceuticals in pharmaceutical, food, chemical, cosmetic and other industries. Pre-chromatography preparation, pharmaceutical QC and R&D, environmental monitoring, mineral and blood analysis, forensic identification. Used for precise quantitative loading / dilution of blood, biological reagents, oral agents, injections, advanced cosmetics, flavours, fungicides and other liquids.
