The Model 1000FS Pressure Sensitive Labeler uses feed screw infeed to increase precision spacing, accuracy, and speed. It is designed to apply one body label only on round bottles and on one side of a rectangular bottle. It is also equipped with a servo-driven label applicator. The 1000FS precisely controls web feed and label placement through the use of a single feed screw, powerful PLC, quality photo-eye and gap sensors, and a sophisticated electronic braking drive. There is no clutch/brake mechanism that will wear out. All machine functions are controlled through the PLC interface.
The Model 1500NR Labeler is designed to apply front and back labels to non-round bottles at speeds up to 150 bottles per minute with excellent label placement accuracy. With the inclusion of our wrap station assembly, the Model 1500NR Labeler can apply single full wraps to round bottles, making it truly a versatile labeler. It is also capable of applying a neck label. The Model 1500NR Labeler has been designed for ease of use and convenience.
The Paradigm 700MB Labeler is capable of applying one or two body labels and a neck label. In the base configuration it is capable of applying one body label. These include a built-in bottle accumulation table, star-wheel mechanism for proper bottle spacing for labeling, and an extended conveyor on the infeed end. This makes the machine ideal for labeling either after filling or before filling.
Applicable labels: self-adhesive label, self-adhesive film, electronic supervision code, bar code, etc. Applicable products: products requiring labels or films on the circumferential surface. Application Industry: widely used in food, toys, daily chemicals, electronics, medicine, hardware, plastics and other industries.
This machine is used to label the adhesive label on the round bottle. It is suitable for PET bottle, plastic bottle, glass bottle and metal bottle. It is a small machine with low price which can put on desk. Applied to food, pharmaceutical, chemical, stationery, hardware and other industries.
This machine is used to label the adhesive label on the flat surface. Application industry: widely used in food, toys, daily chemicals, electronics, medicine, hardware, plastics, stationery, printing and other industries. Applicable labels: paper labels, transparent labels, metal labels etc.
Designed for filling bottles with liquids meant to be sprayed, thus the bottles are capped with spray pumps. Can work with bottles made of glass, plastic and metal. To operate the machine needs compressed air supply with a pressure of 6 - 8 Bars. Air consumption is 600 L per minute. Capacity is 50 BPM.
Designed for labeling plastic, glass or metal bottles with diameter within 20 – 130 mm. PLC controlled, parameters are set via HMI on a touchscreen. Label type: Self-adhesive (sticker). Label height: 20 – 150 mm / 20 mm – 230 mm (only option available on machine). To operate the machine needs compressed air supply with a pressure of 6 - 8 Bars. Capacity is 120 BPM.
Designed for labeling cardboard boxes, plastic, glass or metal bottles. PLC controlled, parameters are set via HMI on a touchscreen. Label type: Self-adhesive (sticker). Label height: 20 – 150 mm / 20 mm – 230 mm (only option available on machine). To operate the machine needs compressed air supply with a pressure of 6 - 8 Bars. Capacity is 50 - 150 BPM.
Designed for labeling plastic, glass or metal bottles. PLC controlled, parameters are set via HMI on a touchscreen. Label type: Self-adhesive (sticker). Label height: 20 – 150 mm / 20 mm – 230 mm (only option available on machine). To operate the machine needs compressed air supply with a pressure of 6 - 8 Bars. Air consumption is 300 L per minute.
