The bag making process is fully automated and consists of forming the bag, closing if required, filling it (filling machine required), sealing, and then dropping the product. We can offer a considerable variety of bags, for example, standard pillow bags, gusset bags, etc. Our machines are manufactured to a modern design with an outer cabinet made from 304 stainless steel, the machines are of a robust construction and have a long life.
The ZT-1200B's high-precision grain grading machine makes it easy to recognize minor differences in color and small spots. High-quality LED backlighting with low power consumption and stable performance can improve sorting accuracy.
Lined sealing and stitching automatic packaging machine fit for packaging of single layer Kraft paper, multi-layer Kraft paper, and paper/plastic laminated bag. It could automatically finish the processes of dust-clean, stitching, thread-cutting, trimming, binding the edge, cutting off, heat seal, pinching, count etc.
Increased capacity and output volume of pralines and chocolate based products can be obtained by means of a cooling tunnel. Once moulded or enrobed products enters the conveyor on the cooling tunnel there is an open length of 1.0 m for manual or mechanical decoration of the products. In the end of the cooling tunnel is an open packing table of 1 m.
The open stainless steel framework provides easy access for thorough cleaning. No need tools to remove the conveyor, simplifying clean-up procedures and reducing clean-up time. The memory card can store up to 100 operating parameters to minimize operator errors and reduce production downtime during changeovers. Weighing range is 30 – 1000 g.
HAB Series bottle dryer is designed to remove excess water droplets from the surface of bottles. In a hot filling line, containers are spray cooled to a temperature close to ambient temperature for packaging purpose. HAB Series is integrated with low energy consumption but high volume output air blower for effective bottle drying. The length and number of air blowing tubes can be customized for different line specifications.
Designed for production of plastic bottle caps at a high speed. Fully automatic, controlled by PLC. Minimal cap diameter is 25 mm, maximal — 30 mm. Equipped with temperature deviation alarm. To operate the machine needs compressed air with a pressure of 0.8 MPa.
Designed for production of plastic bottle caps at a high speed. Fully automatic, controlled by PLC. Minimal cap diameter is 25 mm, maximal — 45 mm. Equipped with temperature deviation alarm. To operate the machine needs compressed air with a pressure of 0.8 MPa.
This machine is mainly used for the manufacture of gaskets for plastic caps. It is compact, efficient and easy to operate. The gasket made with it is smooth and beautiful. The bottle cap with it is easy to open and tightly closed, preventing the leakage of water and gas. In addition, it complies with the national food hygiene standard and has a similar performance with imported caps and molding machines.