The machine integrates mechanical, electrical and pneumatic components. The whole system is controlled by micro PLC, operated by human-machine interface, and can work by itself. It integrates feeding, heating, forming, punching, cutting, stacking, and waste recycling.
The machine is designed for producing plastic trays. Full servo drive system, all motors are Taiwan Delta brand, can drive the equipment at high speed and can do 30 times per minute. The machine is also equipped with a chiller, an air compressor, and an air storage tank.
Suitable for PVC, PET, PP, PS, etc, the machine furnace produce heat to soften the plastic sheet, then vacuum pump sucks the plastic sheet down to the forming mould area to finish the forming, different forming mould enable to have different forming shape. It is suitable for the blister packaging in toys, hardware, food, electronic products, medicine, commodity, etc.
The molding area of this equipment can be 750*480 mm, and the maximum depth can be 180 mm. This depth can be used for plastic milk tea cups, coffee cups, disposable water cups, etc. Adjusting the depth can also be done without the plastic box, such as: takeaway fast food boxes, fresh-keeping trays, egg trays, fruit boxes, plastic covers, etc.
The machine integrates feeding, heating, forming and cutting waste recycling. The forming area can reach 650*320mm, the fastest speed can be 30 times per minute, and the forming height can be up to 180mm. The air compressor provides sufficient air source for molding, the chiller provides cold water to cool the plastic products, and the waste is rolled by the motor-driven waste rack.
The machine combines forming, cutting, and stacking into process. Widely used and suitable for most of the customer requested, it can produce plastic trays, containers, boxes, lids, etc. The machine is completely driven by servo motor. Stable operation, low noise, high efficiency, high quality.
This is a combination of mechanical, electrical and pneumatic components, and the whole system was controlled by a micro PLC, which can be operated in man-interface. It combines the material sending, heating, forming and cutting into one process. It has three operation modes: "manual", "semi-automatic"and "automatic".
This cup packaging machine adopts touch screen, PLC, servo motor drives two-way to count cups. All imported components and parts choose international famous brand. The body is of compact design. It can reach the advantages of stable performance, high precision, fast speed and simple operation.
This machine adopts Japan OMRON Control system, the whole system realizes Human machine Interface. All parameters are set on the touch screen and all the running status is being monitored. The equipment has diagnostic function, fault messages and elimination measures real-time display, easy to operate and maintain.
PLC controlled, parameters are set via HMI on a touchscreen. Three-stages heating, easy for the forming of Convex or Concave Moulds. Used as seeding tray forming, 3D wall paper, cooling tower filling, electric tray, cosmetic tray, tableware thermoforming, etc.