The machine is used for cap screwing of round bottles, rectangular flat bottles or oblate bottles. Equipped with advanced HMI and PLC control. The machine can work with caps 19 – 55 mm in diameter, bottles with 23 – 100 mm in diameter and 45 – 320 mm in height.
The machine is used for capping round and square bottles for food, medicine, cosmetics and chemicals. Equipped with advanced HMI and PLC control. Major components are made of 304 stainless steel. The machine can work with a screwing speed 10 – 40 bottles per minute.
The machine is used for capping of bottles of which mouth height is consistent with or higher than the body height. Equipped with advanced HMI and PLC control. Major components are made of 304 stainless steel. The machine can work with a screwing speed 10 – 40 bottles per minute.
Soft and safe, the pop can is becoming increasingly popular because it can effectively avoid damage during transportation. Our automatic open top can sealer is specially offered to install the aluminium lid onto the cans, to meet the customer demand.
This machine is used for capping glass jars with condiments, beverage and so on. After being equipped with vacuum system, the machine pump air can produce vacuum inside the jar and then seal it with screw cap. It could prolong the shelf life and improve the taste. It is a fully automatic vacuum and capping machine for round and abnormal shape glass jar and is an ideal machine for food plants.
The POB-1S machine is ideal for packaging a wide range of products in plastic cups sealed with aluminum foil lids. Output: up to 12 cups a min
The machine has simple structure, convenient adjustment; production speed is fast, high pass rate, after cap pressing has good performance, it suitable for cap pressing of foodstuff, soy sauce, vinegar, vegetable oil in bottles. Applicable bottle diameter must be within 50 – 110 mm, bottle height — within 150 – 300 mm. To operate the machine needs compressed air supply with a pressure of 0.6 - 0.8 MPa.
This automatic inline capping machine has four speed-adjustable motors, which separately used in lid arranging, bottle clamping, lid capping and conveying. Applicable bottle diameter must be within 50 – 110 mm, bottle height — within 150 – 300 mm. To operate the machine needs compressed air supply with a pressure of 0.6 - 0.8 MPa.
This automatic inline capping machine has four speed-adjustable motors, which separately used in lid arranging, bottle clamping, lid capping and conveying. Applicable bottle diameter must be within 35 – 140 mm, bottle height — within 50 – 300 mm. To operate the machine needs compressed air supply with a pressure of 0.6 - 0.8 MPa.
This capping machine is dedicated to inline capping of the lid with nozzle and gunner cap, used in daily chemical and cosmetics industries.