The machine is designed to produce polyester bottled mineral water, purified water, alcoholic beverage and other non-gas beverage machinery. Beverage Machinery can finish all the process such as washing bottle, filling and sealing, it can reduce the materials and Outsiders touch time, improve the sanitary conditions, production capacity and economic efficiency.
Designed for filling beer into bottles and can work with 270, 330 and 500 ml glass and plastic bottles. The machine can wash the bottle, fill it with beer and seal the bottle. Capacity is 2000 bph when filling into 500 ml bottles.
Designed for filling beer into bottles and can work with 270, 330 and 500 ml glass and plastic bottles. The machine can wash the bottle, fill it with beer and seal the bottle. Capacity is 3000 bph when filling into 500 ml bottles.
Designed for filling beer into bottles and can work with 270 and 330 ml glass and plastic bottles. The machine can wash the bottle, fill it with beer and seal the bottle. Capacity is 10000 bph when filling into 330 ml bottles.
Designed for filling beer into bottles and can work with 270 and 330 ml glass and plastic bottles. The machine can wash the bottle, fill it with beer and seal the bottle. Capacity is 20000 bph when filling into 330 ml bottles.
Designed for filling beer into bottles and can work with 270 and 330 ml glass and plastic bottles. The machine can wash the bottle, fill it with beer and seal the bottle. Capacity is 500 - 600 bph when filling into 330 ml bottles.
The machine is designed for filling water into 5 gallon / 20 L barrels made of plastic. It can wash the barrels from inside and outside. Equipped with conveyor belt 4000 x 500 x 600 mm in size. Capacity is 300 barrel per hour.
The machine is designed for filling water into 5 gallon / 20 L barrels made of plastic. It can wash the barrels from inside and outside. Capacity is 900 barrel per hour.
The machine is designed for filling water into 3-5 gallon barrels made of plastic. It can wash the barrels from inside and outside. Capacity is 150 barrel per hour. Uploading and dropping barrels changed from 45 degree, which is more stable. Nozzles can insert into 10-15cm of the barrel in order to rinse small impurities down.
This machine is a device developed exclusively based on digesting and absorbing domestic and international pop can filling and seaming machine. It adopts the normal pressure filling principle. The machine is PLC controlled; parameters are set via HMI on a touchscreen. The main motor and other electrical components are placed in protected area. The main electric and pneumatic components of the machine are famous imported brands.
