This soft drinks production line speed is 18000BPH, we also can produce capacity from 2000BPH to 24000BPH for 200-2000ml PET bottles. The features of this soft drinks production line are good tenacity and wearability, high filling accuracy without leakage, easy and friendly operation.
This machine can fill carbonated drinks into glass bottles and can be separated to 3 modules. The height of the bottle-out conveyor is adjustable, bottles are conveyed to rinser, filler and capper through starwheel and conveyed out finally through bottle-out conveyor. The machine is fully automatic.
This is a 3-in-1 filling, combined with rinsing, filling and capping. It is innovated and designed in the requirement of still pure water and mineral water, on the bases of introducing, digesting and absorbing advanced technology from Germany and Italy. To operate the machine needs compressed air supply with a pressure of 0.3 - 0.7 MPa.
The machine is used to produce bottled mineral water, purified water, flavoured water, alcoholic beverage and other non-gas Liquid. This Machine can be applied to all kinds of plastic bottles such as PET, PE. Bottles size varies from 250ml-2500ml meanwhile few changeover is needed. Output is 4000 BPH.
The machine is used to produce polyester bottled mineral water, purified water, alcoholic beverage machinery and other non-gas beverage machinery. Beverage Machinery can finish all the process such as washing bottle, filling and sealing, it can reduce the materials consumption and outsiders touch time, improve the sanitary conditions, production capacity and economic efficiency.
The machine is used to produce bottled mineral water. PLC controlled, parameters are set via HMI on a touchscreen. Output is 4000 BPH. The parts contacting the product are made of high-quality stainless steel, and the main electrical components are all products of well-known international manufacturers.
This washing filling capping machine is mainly used for non-aerated carbon dioxide drink, such as mineral water, pure water and so on. The machine design shortens the time for the drink material contact with outside, increase the sanitation condition throughout economy benefit. Output is 3000 BPH.
This machine is designed in the requirement of still pure water and mineral water production on the bases of introducing, digesting and absorbing advanced technology from Germany and Italy. Water is filled into PE bottles at a nominal rate of 5000 BPH. PLC (Mitsubishi, Schneider or OMRON) controlled, parameters are set via HMI on a touchscreen.
This machine is mainly used in the beverage filling operations. The three functions of bottle washing, filling and sealing are composed in one body of the machine. The whole process is automatic. The machine is used in filling juices, beverage in bottles made of polyester and plastics. Output is 6000 BPH.
The machine is mainly designed for filling hot temperature liquid into glass bottles, for example, juice, tea drinks etc., which are made of concentrate juice. The final filling temperature will be around 85-90 degree centigrade. Once the thermal meter in juice filling machine is lower than the temperature, juice will be return to sterilizing machine again through return system.
