A pellet machine is used to compress a variety of resources into a tiny pellet. The equipment is designed for various types of pharmaceutical and food production. The pellet machine is equipped with a rotatable matrix disc, vertically adjustable pressing rollers that can control the position of the upper and lower plungers, a drive for a height adjustment of the rollers. Output depends on the model and varies between 1 and 25 kg per hour.
It is designed to produce pellets and granules and is equipped with two types of spray gun: for suspension coating and for granule / coating use. The following functions are adjustable on the machine: temperature, powder charging speed, spray gun volume, pressure and airflow.
The Roller Compactor is designed to have 3 functions in one unit. These are compression, milling, and granulating. It is a simpler operation than wet granulation. No water or other liquid is added, so the loss of active ingredients due to decomposition can be eliminated. Highly stable granules can be obtained. Output depends on the model and varies between 5 and 400 kg per hour.
Wet granulator is designed to process wet power into long shape granule. High Production output with fine and even sized granules. Screens are changed easily. The process of granulation is continuous and this machine meets GMP standards and is cleaned easily. Output depends on the model and varies between 40 and 200 kg per batch.
Powder coating: the binder and powder are sprayed onto a tiny granule or sugar to form a larger tablet. Suspension coating: Mix the active ingredients with the binder in the solution, spray the solution on a smaller granule to become a larger granule. Suitable for pharmaceuticals, cosmetics, agriculture, food additives or biotechnology products.
Used to handle materials of pharmaceutical grade, food grade and chemical grade. The contact parts with the material are completely made of acid proof stainless steel SUS316. High speed running: 9000 rpm/min (60HZ), high production capacity: 100~200 kg/h. High fineness: 100~300 MESH.
Applicable to handle materials for wet granulation and dried granule trimming (suitable for tableting). Used in food, pharmaceutical, chemical and ceramic industries. Ideal for wet granulation. Granulating time is very short. Made of stainless steel.
There is no need to put liquid and dry the granules as well during the process of dry granulation. Dry granulation can turn the low density, light and bad fluidity materials into high density and very good fluidity materials as well as can tablet directly. Applicable to materials, which need to be made with dry compression, granulation and granule trimming.
Applicable to medicine (granules for tableting, powder granules (40 – 100 mesh), capsule filling granules), chemical and food industries (instant powders, etc), biotechnology. The exterior of this machine is completely made of stainless steel, meeting the PIC/S GMP standards. High quality and high mixing efficiency; can finish the process within 3 – 5 minutes.
The machine is used to turn irregular-shaped granules into uniform sized granules. Applicable to food, medicine, chemical industries. Equipped with various optional screens made of stainless steel. The machine is easy to operate and maintain, it is sealed through a special design, so it will not produce pollution.