Pet preform injection molding machine equipped with high performance servo motor controlling system, the machine's output power can vary in accordance with the loading changes, which reduce energy consumption and noise.
Automatic PET Bottle Automatic Blowing Machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottles, mineral water bottles, pesticide bottle, oil bottle, cosmetics bottle, wide-mouth bottle and hot fill bottle etc. Volume of suitable bottles is 0.1 – 2 L.
BM series Semi-Automatic PET Bottle Blow Moulding Machine can blow plastic bottles for water, oil, juice, carbonated drinks etc. One oven is matched with two blowers, which is small in size, productive and energy saving and fit to blow plastic bottles of various raw material in a big quantity. Volume of suitable bottles is 0.1 – 1.5 L. Output is 800 – 1000 bottles per hour.
BM-9B semi-automatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 5L-10L. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle, oil bottle, cosmetics, wide-mouth bottle etc. Output is 250 – 400 bottles per hour.
BM-9A-1 Semi-automatic bottle blow molding machine can produce PET containers including the bottles for kinds of wine, drink, soybean, vinegar and pesticide (less than 5 liters) according to the different bottle shape and diameter. Output is 300 – 600 bottles per hour.
This semi-automatic 5 gallon bottle blow molding machine is especially used to produce 3 gallon to 5 gallon bottles and is widely used to produce any shapes of plastic from PET with neck diameter from 15mm to 200mm. Output is 60 – 180 bottles per hour.
Our Wide Mouth PET Bottle Blowing Machine adopts infrared type heating mode, whose superior thermal-radiation and thermal penetrability provide machine with powerful heating to meet strict preform heating requirement under speedy moving. Infrared heating lamps placed onto three heating zone with 10 sets of independent voltage adjusting module and advanced microcomputer controller, can offer ideal heating for preform in different size.
DY-1200A is a semi-automatic bottle blow-molding machine, which is suitable for producing PET plastic containers and bottles 10 – 2000 ml. It is widely used to produce the carbonated bottle, mineral water, carbonated drink bottle, pesticide bottle, oil bottle cosmetics, etc. The machine is small with low investment, easy and safe to operate.