This machine is designed for blowing the carbonic acid beverage bottles, mineral spring water bottles, farm chemical bottles, oil bottles and medical hot-filled bottles of any shapes, which are made of PET, PP or PE raw materials. Nominal output can reach 1,500 bottles per hour.
GF1302 B Semi-automatic blow molding machine is applicable for blowing carbonic acid beverage bottles, mineral spring water bottles, farm chemical bottles, oil bottles and medical hot-filled bottles of any shapes, which are made of PET, PP or PE raw materials. Nominal output can reach 1,500 bottles per hour.
GF130-2A Automatic blow molding machine is applicable for blowing carbonic acid beverage bottles, mineral spring water bottles, farm chemical bottles, oil bottles and medical hot-filled bottles of any shapes, which are made of PET, PP or PE raw materials. Nominal output can reach 4,360 bottles per hour.
It is applicable for production of different pet bottles for water, beverages, oils, etc. both hot and cold filling, still or carbonated drinks. Servo driven, PLC controlled, parameters are set via HMI with a touchscreen. Max. bottle volume is 0.6 L, neck diameter is 18 – 38 mm, output is 12,000 BPH.
It is applicable for production of different pet bottles for water, beverages, oils, etc. both hot and cold filling, still or carbonated drinks. Servo driven, PLC controlled, parameters are set via HMI with a touchscreen. Max. bottle volume is 0.6 L, neck diameter is 18 – 38 mm, output is 9,000 BPH.
It is applicable for production of different pet bottles for water, beverages, oils, etc. both hot and cold filling, still or carbonated drinks. Servo driven, PLC controlled, parameters are set via HMI with a touchscreen. Max. bottle volume is 0.6 L, neck diameter is 18 – 38 mm, output is 6,500 BPH.
It is applicable for production of different pet bottles for water, beverages, oils, etc. both hot and cold filling, still or carbonated drinks. Servo driven, PLC controlled, parameters are set via HMI with a touchscreen. Neck diameter is 15 – 45 mm.
This is a new generation of fully automatic and versatile machine for mass production of PET bottles with volumes up to approximately 200 ~ 1500 ml. Ideally suitable for large scale factories and for applications where stringent quality requirements have to be met. Substantial reduction in operating cost is achieved by saving labor.
This series is a single station extrusion blow-molding machine for containers from 50ml to 20L. These machines exhibit high reliability, excellent efficiency and flexibility to meet varied customer requirements. Material to be used for production: PE and PP.
