The LM-21 Madison Label Bander is the ideal solution for many industrial labeling applications. As an orbital label applicator, the LM-21 applies virtually any kind of label in adhesive levels from micro-adhesive (releasable) to permanent around the entire product.
The LM-17 Madison Label Bander is the ideal solution for many industrial labeling applications. As an orbital label applicator, the LM-17 applies virtually any kind of label in adhesive levels from micro-adhesive (releasable) to permanent around the entire product.
The Model 2000NR is designed to apply front and back labels to non-round and round bottles at speeds up to 300 bpm. By adding a third labeling station and a Wrap Station Assembly, the 2000NR can apply neck wrap labels to round bottles
Incoming round containers are spaced using a single powered feed screw. Non-round containers require dual feed screws. The conveyor is driven by a variable speed motor.
The Paradigm 700 is a fully automatic label applicator capable of applying labels to a variety of products. Label application can be from the top down, bottom-up, or both.
The model 680 Pressure Sensitive Case Labeler is a fully automatic labeler especially designed for ease of operation. It comes with a self-teaching label gap sensor that makes set up uncomplicated and trouble-free. The machine has a high rate of consistency with a fixed conveyor speed of 680 ipm. It is designed for accurate placement of labels on cases and boxes. Standard features on the 680 Case Labeler are a self-teaching label gap sensor, a microprocessor control, and stepper-driven labeling applicator.
The Paradigm 700NR Labeler is a variable speed, fully automatic labeling machine. It can apply labels to non-round containers and with the addition of a wrap station can label round containers as well. It will apply two labels (front and back) since two labeling heads are utilized. The machine utilizes all stainless steel and aluminum construction and off-the-shelf components rather than proprietary boards and motors.
The Paradigm 700NW is a fully automatic labeling machine capable of applying two body labels and a neck label to round bottles in the standard configuration. The machine can also be configured for the application of front and back labels only or one body label and a neck label only. In a two-body configuration the machine can apply front and back labels to both round and non-round containers.
The Paradigm 700 is a completely new shift from current designs. The conveyor height, width, and length can be reconfigured, along with the direction of the machine (left hand or right hand) and one of three labeling styles – wrap, spin-in-place, or trunnion style. Changing your line layout or the packages you run does not make the labeler you already purchased obsolete. The machine is loaded with nice features: all stainless steel and aluminum construction, off-the-shelf components rather than proprietary boards and motors, a stepper-driven applicator and a standard touchscreen interface on all models. All speeds on every 700 are synchronized together to avoid common labeling errors, and our Autoset bottle measurement and recipe system ensure easy setups and changeovers.
The Model 700SP is a fully automatic and self-contained labeler designed to apply one or two body labels to round containers. Note that for two label applications (front and back) the labels must be alternating from the same web. This machine also is capable of applying clear labels. It precisely controls web feed and placement by utilizing Spin-in-Place labeling techniques in addition to a stepper labeling drive. Spin-in-Place means that the label starting point is referenced from the wall of the container instead of the base, which is generally a better reference point. Gripper plates are designed to the bottle diameter for increased accuracy. Label placement accuracy is excellent on this machine.