ZP1100 is a new generation product. It is economical and high-speed tablet press suitable for production of quality tablets. It can produce all types of round tablets, irregular tablets and engraved tablets from both sides. The machine fully meets GMP standards.
Model ZPW20 adopts a fully enclosed structure with operation compartment isolated from the outside. The compressing compartment is wholly made of stainless steel, which is in full compliance with GMP standards. The machine can be used as a normal tablet press or for production of double layer tablets after a slight alteration.
This machine is a double-press type continuous automatic tablet press for pressing granular raw materials into tablets. It is mainly used in pharmaceutical industry and also the chemical, food, electronic industries. It can produce all kinds of round tablets and irregular tablets.
Designed to press the granule and powder materials into tablets. Can work with granule raw material with smaller than 100-mesh powder not less than 10%. Can produce round and irregular tablets. Max. tablet diameter depends on the model and varies between 11 and 25 mm.
Designed to press the granule and powder materials into tablets. Can work with granule raw material with smaller than 100-mesh powder not less than 10%. Can produce round and irregular tablets. Max. tablet diameter depends on the model and varies between 11 and 22 mm.
KP2-Series is a high-speed rotary tablet press with having pre-pressure & main pressure station. It is designed based on GMP standard and easier operation & simple maintenance. The compression area is paint-free and completely covered stainless steel the compression zone. The compression zone and upper punch cam could assemble & disassemble without any tools. Thus, changeover time and cleaning time is very fast & convenient.
KP4-Series is a high-speed rotary tablet press with having pre-pressure & main pressure station. It is designed based on GMP standard and easier operation & simple maintenance. The compression area is paint-free and completely covered stainless steel the compression zone. The compression zone and upper punch cam could assemble & disassemble without any tools. Thus, changeover time and cleaning time is very fast & convenient.
KP4S-Series is a newly developed high-speed automatic rotary tablet press with equipped a smart TCS® Tableting control system. It is designed based on cGMP standard and easier operation & simple maintenance. The machine established high efficiency and increase high quality tablets productivity. Smart Tablet press, KP4S-Series controlled by the computer system is designed in compliance with 21 CFR PART 11 and manufactured suitably for the unmanned production environment.
KP5-Series tablet press designed to produce a single layer and double layer tablet with high speed. It is designed based on GMP standard and easier operation & simple maintenance. The compression area is paint-free and completely covered by stainless steel the compression zone. The compression area is paint-free and completely covered stainless steel the compression zone. The compression zone and upper punch cam could assemble & disassemble without any tools. Thus, changeover time and cleaning time is very fast & convenient.
A single tablet press with an output of 2,000 tablets per hour. XENA-I is driven by a 0.75kw electric motor and 25w electric motor mounted the machine. It is furnished with a high efficiency worm gear drive, which is totally enclosed and works in an oil bath. Equipped with an automatic pressure release, which offers positive protection against the use of excessive machine pressure.
