气雾剂灌装机

The machine consists of liquid product filling station, valve sealing station and propellant inflating station. The 3 mentioned working stations are installed on the same working table. It could be operated by 1 worker or 3 workers per customer’s requirements. It is suitable for a small and medium capacity production. Filling capacity is 20, 50, 100, 400 and 600 ml. Output is 1,200 cans/hr.

Semi-automatic Bag-on-valve Aerosol Filling Machine integrates the vacuum pumping, compressed air (or nitrogen N2) filling and sealing as a whole. It is especially suitable for water-based aerosol products filling. It is fast in speed, precise in filling volume and good in airtight seal, and the required inflation pressure can be adjusted at will. It is equipped with PLC + touch screen for control.

Automatic aerosol filling machine consists of automatic can feeding machine, automatic liquid product filling machine, automatic crimping & gassing machine and a conveyor. Automatic aerosol filling machine is full air driven except the conveyor. The main pneumatic parts are from SMC Japan. The working speed output rate could reach 30-70 cans per minute.

The whole machine is controlled by pneumatic and can be controlled separately. Equipped with one sealing head, 3 gas filling heads, 2 pressure pumps and 1 pc air storing tank. The whole machine is controlled by pneumatic. The sealing head with the guiding device, high sealing quality, the gas filling heads also with the guiding devices, less leaking.

The machine is suitable for filling all kinds of liquid materials, such as thin liquid (kerosene), thick liquid (facial cleanser, PU foam) etc. This model is available for all kinds of aerosol cans. Applicable can height is 70 – 330 mm.

JF-QGB semi-automatic aerosol filling line, composed of semi-automatic double-headed filling machine, semi-automatic sealing machine, semi-automatic inflator (propellant filling machine (including booster pump)) three parts. Production capacity: 1200 cans/h