The automatic case erector opens, forms, and fold cartons, sealing with tape or glue as needed before sending the empty carton to the packing machines. Forming speed: 15-18 cases per min
The automatic erector machine is used for the forming and sealing of cartons. The maximum opening speed of the vertical opening mode of the machine can reach 12 boxes per minute.
YPK-4025/40/60 is different from YPK-4012. The high-speed open-box machine uses horizontal way to open box. At present, there are three speed types of high-speed open-box machine, 25 boxes/minute, 40 boxes/minute and 60 boxes/minute.
Automatic box forming machine with a capacity of up to 720 boxes per hour. Thanks to the vertical storage allowing carton blanks to be added at any time. The machine can be used separately or in a production line.
Fully automatic box folding & sealing machine is used to fold and seal boxes/cartons automatically. It integrates a folding & sealing machine for upper side and a sealing machine for four sides. Capacity is 400 – 600 pcs. per hour.
The machine can automatically carry out the functions of carton unpacking, bottom flap folding, bottom tape sticking, output, etc., which is economical and efficient. The operation must be completed in a stable state, there must be sufficient reliable positioning and safeguard, and must not cause damage to the carton. Capacity is 720 boxes per hour.
Taiwan technology manufacturing and the selection of imported parts, electrical components and pneumatic components. Vertical storage cardboard, and can be replenished at any time carton board, do not need to stop. Suitable for the same carton size packaging at the same time, change carton specifications, manual adjustment can be, the time required 1-2 minutes.
Case erector, is a machine that are used to erect all types of cases or boxes for packaging. Case size must be within 200-450*150-400*100-350 mm. To operate the machine needs compressed air supply with a pressure of 5 – 6 kg/cm3. Capacity is 8 – 12 pcs/min.
BF20 Box Forming Machine automatically sets up folded cartons and puts together boxes with or without cover. It consists of a carton magazine unit equipped with an automatic arm which lifts cartons from the magazine by means of suckers and of a hot glue spraying device for gluing flaps. Once the box is formed by means of a mould it is transported along a conveyor. Format change can be easily done by just regulating the special hand-wheels. The forming unit - consisting of one single part - has been constructed in order to avoid regulating operations. All adjustments are set via microprocessor in order to assure quick and precise changes. It is designed and manufactured to satisfy all filling, closing, checking and labelling requirements.
This machine is suitable for automatic packaging lines, include carton opening, erecting, folding bottom flaps and sealing at a time. Manually refill unopened cardboards at any time. Side belt driven. Applicable to common cartons. Used for automatic packaging lines, include carton opening, erecting, folding bottom flaps and tape sealing at a time.