The incoming dry vials (sterilized and siliconised) are fed through the in-feed turntable and suitably guided on the moving delrin slat conveyor belt at the required speed of the correct placement below filling unit. The filling unit consists syringes & nozzles uses for the filling. The vials in a raw are stopped under the filling nozzles by the starwheel rotating indexing mechanism for filling operation and move further to stoppering station for stoppering operation. Output is 30 – 200 vials per minute.
Packry’s small essential oil plastic/glass bottle filling and capping machine can widely used for filling and capping for small volume liquid filling, plugging and capping, such as vial essential oil, E-liquid, anti-biotic, eye drops and so on. All contact parts is made of stainless steel, its capacity can reach 3000 bottles per hour.
The Packry F-HW Series Vertical Thermostatic Liquid Filling Machine is designed for the quantitative filling of highly viscous liquids, pastes in the pharmaceutical, cosmetic, food, pesticidal and special industries. The structure is simple and reasonable, high accuracy, ease of operation, design to a greater extent meet the requirements of a modern enterprise. Filling Speed: 0-30 bpm
The machine uses fully automatic PLC and HMI control is rotary liquid filling in one of the most technologically advanced products. Level and the amount of time control, high degree of automation, large production capacity. All innovative ideas drip control, no leakage. Filling capacity is 50 – 1000 ml.
The machine automatically can complete the processes of bottle-feeding, cap unscrambling, cap setting, reverse cap removing, and accomplish pressing process of thread to seal under the rolling press from hobs. The cap after been screwing down has a good sealing performance, and very convenient to open as well as playing a role of anti-counterfeiting.
Filling and capping machine is one kind of automatic production equipment, it is suitable for different viscosity liquids. Pneumatic piston type filling, volume measurement. High precision and efficient. Widely applied in the food, pharmaceutical, daily chemical, pesticide, cosmetic and other industries producing liquids or viscosity creams.
The machine is suitable for filling liquid products, widely used in food, chemical, beverages, and similar Applicable bottles are made of glass or plastic and have capacity within 10 – 5,000 ml. Output is 60 – 6,600 BPH.
Designed for filling both liquid and sticky products and is suitable for Small and Middle Filling Projects. It is widely used to Fill Juice, Jam, Drinks, Cosmetics, Cream and similar products. To operate the machine needs compressed air supply with a pressure of 0.5 MPa. Capacity is 1,200 – 1,800 BPH.
MY-A Automatic filling machine for bottles is widely used in food, household chemicals, medicine, etc. This series of pasta filling machines is a long-term production experience and the introduction of advanced world technologies. Productivity: 20-60 bottles / min
SDGP-4-2 Rotary filling and capping machine is suitable for bottling liquid and semi-liquid products without gas. Easy container replacement and easy setup. This filling machine is suitable for all types of glass, plastic round bottles; it is a good choice for food packaging, pharmacies, cosmetics, chemical plants. Speed: ≤2400 bottles / hour
